Pb-Free Reliability Under Harsh and Commerical Environments

Folks,

In gathering information on the status of lead-free soldering, some helpful friends pointed out two great sources of information: NASA and the US Navy.

NASA sponsored an impressive lead-free reliability investigation: “Lead-Free Solder Testing for High Reliability Project 1.” This project is finished and the reports are online. A follow-on project, NASA DOD Lead-Free Electronics Project 2, is underway.

The Navy sponsored a project with ACI and the summary is here. I am currently studying these documents to help develop the consensus. Some preliminary info follows:

Regarding -20°C to +80°C thermal cycling, NASA concluded:

Under the conditions of this test, Sn3.9Ag0.6Cu (SAC) and Sn3.4Ag1.0Cu3.3Bi (SACB) were always more reliable than eutectic SnPb regardless of component type (CLCC, TSOP, BGA or TQFP).

It has been shown that conditions that highly stress the solder joints by maximizing the CTE difference between the PWB and the component will favor SnPb over SAC6. Conversely, conditions that minimize the stress put on the solder joints (e.g., compliant components such as BGA’s and/or a thermal cycle with a small delta T) will favor SAC over SnPb. The current test falls into the latter category and we can say with some confidence that the lead-free alloys tested will outperform eutectic SnPb under field conditions that are even less stressful than the -20 to +80°C thermal cycle test conditions.

For -55°C to +125°C thermal cycling, the conclusions were more cautious, likely because the data were mixed:

The feasibility of using Pbfree solder alloys in place of SnPb solder alloys for new product designs was demonstrated under thermal cycle test conditions. Additional investigation and characterization of Pbfree solder alloys will be required as a segment of a Pbfree solder alloy implementation plan. The application/introduction of Pb-free soldering processes for legacy product designs is not recommended without extensive materials characterization and product design review.

These results seem to be consistent with what others report: namely, lead-free assembly produces good thermal cycle results for commercial-type thermal cycling, but the results are mixed for harsh environment thermal cycling.

More to follow.

Cheers,
Dr. Ron

About Dr. Ron

Materials expert Dr. Ron Lasky is a professor of engineering and senior lecturer at Dartmouth, and senior technologist at Indium Corp. He has a Ph.D. in materials science from Cornell University, and is a prolific author and lecturer, having published more than 40 papers. He received the SMTA Founders Award in 2003.
This entry was posted in Dr. Ron and tagged , , , , . Bookmark the permalink.

One Response to Pb-Free Reliability Under Harsh and Commerical Environments

  1. Thanks a lot for your summary post, Dr. Ron…I also discovered last year or so that NASA and the USNavy have conducted some very important research on the long-term (and short-term) reliability effects of Pb-Free solder in hi-rel applications. A complementary issue that the US Navy and the DoD have authored terrific resources, white papers,etc is on the impact of the accelerating DMSMS issues caused by market shifts away from high-rel, SnPb parts toward COTS and Pb-free (‘green’)/ RoHS compliant parts. This is a real problem for us still supporting products that serve the armed forces and other military aerospace applications! Thanks again for your comments and links to those NASA projects – GREAT references! ;-)

    Sincerely,
    Jim Sobe

Comments are closed.