|
Fine Line Stencil Debuts Slic Laser-Cut Stencil |
|
|
|
Written by Mike Buetow
|
|
Thursday, 05 June 2008 |
Slic laser-cut stencil is said to have mechanical and thermal properties of standard stainless steel, but superior paste release and aperture wall smoothness. Incorporate a base material with a denser grain structure said to result in fewer voids and the same tensile and yield strength as stainless steel. Have a repeatability of ±16 µm and are suitable for applications with surface area ratios of 0.55 and above. Featuring a positional accuracy of ±12.5 µm (over 600 x 600 mm) and an aperture dimensional tolerance of ±9 µm, the following standard material thicknesses are available: 0.004, 0.005, 0.006, 0.007, 0.008, 0.009 and 0.010". Additional thicknesses available upon request.
Fine Line Stencil, a division of FCT Assembly, www.finelinestencil.com
|
News