Aqueous Technologies Introduces New Evaporators
Aqueous Technologies Corp. (Rancho Cucamonga, CA) has announced the introduction of a series of evaporators: Model AQ-7, Model AQ-12 and Model AQ-12G.
The evaporators are available in either a natural gas or propane-heated configuration, or as an electric model. Typical applications include minimizing wastewater from machining operations, parts washing equipment, compressor condensate, mop water, die cast solutions and many other water-based wastestreams.
Installation of the series is simple. Model AQ-7 requires an electrical service and a 6 in. vent stack. Model AQ-12 requires an electrical connection and a 10 in. diameter vent stack. Model AQ-12G requires a 110 VAC electrical connection, a ¾ in. standard pressure gas line and a 10 in. exhaust stack. The units can be filled using three different methods: plumbing the feed source into the supplied coupling on top of the unit; removing the lid and manually fill the unit; or using the optional 70 GPM self-priming fill pump.
After an initial heat up time of approximately one hour, the units will evaporate at rates between 5-7 GPH or 12-17 GPH, depending on the model.
The evaporators will shut down automatically via a low-level control. A secondary high-temperature shutoff is also provided. When a cycle is completed, the waste material can be drained via a 2 in. drain opening, vacuumed out of the unit via the removable lid with a wet/dry vacuum or pump, or, for solid materials, scooped out. To facilitate cleanout, the interior tank of the AQ-12G is sloped toward a 2 in. outlet. Additionally, its u-shaped burner tube is located around the perimeter of the process tank, allowing access between the tubes.
Each evaporator in the series features a heavy-duty 12-gauge tank, covers and stack. Additionally, the series offers adjustable burners (NG or Propane) with electronic ignition, flame rectification system and, on the AQ-12G only, an air-pressure sensor. Automatic shutoffs, two-switch on/off operation, removable lid for fast and easy cleanout, fully insulated tanks, power exhaust for outdoor venting and polyurethane finish also come standard.
Copyright 2004, UP Media Group. All rights reserved.
