ESD antistatic wrist straps are adjustable and comfort-stretch. Offer a 1 MΩ resistor and a choice of a 6 or 12' coil cord and 1/4 or 3/8" snap.
 
ESD antistatic heel straps attach to shoes and provide a large contact surface. Width of grounding area is said to provide good floor contact.
 
ESD antistatic three-layer vinyl floor and table mats are used to assist in ESD protection. Use a three-layer construction consisting of conductive metalized fleece sandwiched between a vinyl top surface and a foam bottom layer. Two-layer rubber floor matting is comprised of a top antistatic layer and a conductive bottom layer to provide a high-temperature static dissipative surface.
 
ESD nylon gloves are static dissipative with cleanroom quality. Are breathable with conductive fibers running through the glove. Six dozen gloves per case.
 
ESD FCS-F6R static dissipative finger cots are available in S, M, L and XL. Are spore black, powder-free and come rolled or unrolled, with 720 pieces per bag.
 
Vision5 ESD cleanroom laundered wipes feature conductive fibers knitted with continuous filament polyester for low lint properties. Are said to be abrasion resistant, low in nonvolatile residue and ionic levels, individually inspected and double-bagged in cleanroom bags. 
 
ESD static shielding bags are non-corrosive and feature high seam strength. Reportedly provide low surface resistivity and are available in numerous sizes and thicknesses. Static and/or moisture barrier types of bags are available.
 
ESD swabs are safe for static-sensitive surfaces. Are said to be absorbent and low in particulates. Four types are available with 50 swabs per bag: A1806-PF features an overall handle length of 6" with an antistatic polyolefin handle and an antistatic foam head. Head width is 3/16" and length is 11/16"; A1806-WCF features a handle length of 6" with a wooden handle and an antistatic foam over a regular cotton tip head. Head width is 3/8" and length is 1"; A1806 WF features a handle length of 6" with a wooden handle and an antistatic foam head. Head width is 3/16" and length is 13/16"; A1805-PF RECT features a handle length of 5 1/8" with an antistatic polyolefin handle and a rectangular antistatic foam head. Head width is 11/16" and length is 11/16".
 
ESD brush bristles are made from conductive fibers mixed with natural hair. Handles are made from static dissipative plastic. Will not create a charge. Available in three bristle types: hard, semi-fine and fine.
 
Blue Thunder Technologies Inc., www.bluethundertechnologies.com