MPM EnclosedFlow print head now features positive-displacement, motor-driven pressure system that controls paste chamber pressures to within +/- 0.1 psi. Prints fine features such as 01005s and 0.3mm pitch CSPs with reportedly up to 50% greater volume and 25% lower deviation than squeegee blades. Is good for high-volume fills such as paste-in-hole. Solder paste is held within an enclosed chamber, and is directly pressurized during the print stroke. Is a "plug-and-print" solution. Is for high product mix environments; has detachable, modular chambers that can be removed and stored with fewer than 5 min. needed for changeover. Comes on Accela and new printers; supported sizes include 8", 10", 12", 14", 16", and 18".

Speedline Technologies, www.speedlinetech.com