DX-300 is a mid-range series of digital dispenser/controllers. The microprocessor-driven, digital-timer series is said to dispense precise fluid profiles in an accurate, consistent and repeatable manner.
 
DX-300, with an operating pressure of 0-100 psi, is designed for general fluid dispensing and to control dispensing valves. DX-315, with an operating pressure of 0-15 psi, is designed for low viscosity fluid dispensing. Aside from the different air pressure settings and valve controlling capability, the two are identical in form, fit and function.
 
Each system is packaged for immediate, out-of-box use, with sample tips, barrels and syringe adapters. Features 10 programmable memories to store and recall the most frequently used dispensing cycle timing.
 
The memory feature records the time of the dispensing cycle and determines the dispensing time required when dispensing output is unknown. It also works with the built-in "Teach Mode." To control material "tailing" and waste, has an adjustable vacuum and a vacuum-driven "suck-back" feature, monitored by a built-in vacuum gauge.
 
Footprint is 6 x 6.5 x 7.0" (152 x 165 x 178mm); can be stacked and fastened on top of each other. Full shot time range of 0.008 to 99.999 sec. in 1ms increments and is operational worldwide via a snap-on universal power supply of 100 - 240 VAC, 50 -
60 Hz.
 
Techcon Systems, techconsystems.com
Submit to FacebookSubmit to Google PlusSubmit to TwitterSubmit to LinkedInPrint Article
Don't have an account yet? Register Now!

Sign in to your account