CSM 200 Connector Seating Machine is a semiautomatic machine for the application of compliant pin connectors. A BMEP servo electric press allows for the monitoring and control of force, distance and speed during the press process.
 
Operators manually load a PCB and connectors onto fixtures and tooling. The CSM automatically positions the connectors on the PCB and then an X/Y table with PCB fixture locates the PCB (up to 8 x 11") under the servo press head for processing the connector. Automatically sequentially presses each connector on the PCB to the required specifications. Each press cycle is monitored and can be stopped if an error occurs. Each press cycle can be recorded to provide real-time feedback with full traceability for every connector applied.
 
Specializes in processing right-angle board edge connectors with non-overmolded pins. Uses “comb” tooling to ensure proper location of the pin legs to the hole pattern in the PCB ¾ allowingr faster processing, less scrap and lower applied cost.
 
Tyco Electronics, tycoelectronics.com
Booth 1029