Products
The SV-100 Slider Valve for solder paste dispensing is said to be up to 20% faster than standard auger dispensers; reportedly achieves 20,000 dots per hr. (on 1 mm grid) while delivering dots of less than 300 µm (0.012") for solder paste types 4, 5 and 6. Dots as small as 125 µm (0.005") in diameter can be achieved with type 6 paste. Dispenses dots and lines of pastes and fluids that contain metal additives with minimal clogging. Is compatible with Pb-free and no-clean solder pastes and silver-filled epoxies. Is for solder paste dots for passive components smaller than 0603, rework of BGA and QFN electrical connections, lines and patterns for RF shield attach, low-volume/high-mix applications, and unique patterns of conductive epoxy.
Asymtek, www.asymtek.com
Asymtek, www.asymtek.com
Loctite 5210 is a fast-cure thixotropic silicone material said to be ideal for devices in harsh environments. Offers alternative to hot-melt glues. Is a non-corrosive room temperature vulcanization silicone material designed for wire tacking, selective sealing, vibration dampening, and rework/repair applications. Reportedly has dispense times as little as 31 sec. for two connectors and a tack free time of fewer than 5 min. Offers a high UPH alternative. Material reportedly will hold its form and will not spread or migrate to other locations. Cures at room temperature.
Henkel Corp., www.henkel.com/electronics
Henkel Corp., www.henkel.com/electronics
Circuit Suds biodegradable cleaner was formulated to be environmental friendly. Is said to be suitable for no-clean, rosin, and Pb-free processes. No special handling or disposal reportedly required in the majority of applications; is non-flammable and non-volatile. Can be disposed of as ordinary wastewater with few exceptions. For hand-cleaning through automated lines. Comes in 1 gal., 5gal. and larger containers.
Circuit Suds, www.circuitsuds.com
Circuit Suds, www.circuitsuds.com
