Products
GÖPEL electronic introduces the SFX-5704 as additional component to the JTAG/Boundary Scan hardware platform Scanflex. The I/O Module (SFX Module) was developed for the production test of mixed-signal applications and provides four parallel and independent channels.
Can be freely combined with controllers on PCI, PXI, USB, FireWire or LAN basis as well as TAP transceivers with distances up to five metres.
Each of the four channels features a fully-fledged driver/sensor pin electronic combined with an analog measuring function. For digital tests each channel can be switched to Input, Output, Bidir or Tri State (interposing relay). Individually programmable parameters such as input-voltage (±10V), output-voltage (±10V), maximum driver current up to 300mA and programmable Pull Up and Pull Down resistors enable an application oriented test channel adaptation to the signals to be tested.
Safety measures for the Unit Under Test include automated overcurrent recognition with subsequent current limit (fold back), dynamic driver current gain adaptation (backdriving) as well as a specific clip switching for freely programmable oppression of overshoots on the connected signal lines.
The analog measuring function has an input range of ±10V at a 12 bit resolution. Analog and digital functions can simultaneously be operated at active clip switching.
GÖPEL electronic, www.goepel.com
Can be freely combined with controllers on PCI, PXI, USB, FireWire or LAN basis as well as TAP transceivers with distances up to five metres.
Each of the four channels features a fully-fledged driver/sensor pin electronic combined with an analog measuring function. For digital tests each channel can be switched to Input, Output, Bidir or Tri State (interposing relay). Individually programmable parameters such as input-voltage (±10V), output-voltage (±10V), maximum driver current up to 300mA and programmable Pull Up and Pull Down resistors enable an application oriented test channel adaptation to the signals to be tested.
Safety measures for the Unit Under Test include automated overcurrent recognition with subsequent current limit (fold back), dynamic driver current gain adaptation (backdriving) as well as a specific clip switching for freely programmable oppression of overshoots on the connected signal lines.
The analog measuring function has an input range of ±10V at a 12 bit resolution. Analog and digital functions can simultaneously be operated at active clip switching.
GÖPEL electronic, www.goepel.com
B300 tabletop ultrasonic cleaner includes a stainless steel cleaning tank using industrial-style ultrasonic transducer technology, at 40KHz. Includes an automatic 15 min. timer and comes with a cover and perforated stainless steel basket.
Inside tank dimensions are 11.8 x 3.9 x 2.9”, with half-gallon capacity, in either a 115 or 230 volt unit.
Applications include difficult soils or contaminations, removing brazing fluxes, polishing compounds, lens cleaning. Ideal markets include jewelry, optical and veterinarian markets.
Branson Ultrasonics Corp., www.sonifier.com
Inside tank dimensions are 11.8 x 3.9 x 2.9”, with half-gallon capacity, in either a 115 or 230 volt unit.
Applications include difficult soils or contaminations, removing brazing fluxes, polishing compounds, lens cleaning. Ideal markets include jewelry, optical and veterinarian markets.
Branson Ultrasonics Corp., www.sonifier.com
AccuCheck ESD inspection template allows Photo Stencil to offer precision component verification inspection templates to its customers, directly from its headquarters in Colorado Springs, CO.
“Now that the equipment is located at Photo Stencil’s facility, the company can offer full design and fabrication capabilities, as well as the timely deliveries our customers have come to expect. This is yet another in-house service that Photo Stencil has the capability to offer,” said Mike Burgess, stencil product manager.
Plastic laser-cut templates are a cost-effective and timely alternative to automated optical inspection equipment. Can be used for all board types including SMT, Pin Through Hole Technology (PHT) and combinations of both. The standard turn time is 24 to 48 hrs, depending on the verification of data received.
Photo Stencil, www.photostencil.com
“Now that the equipment is located at Photo Stencil’s facility, the company can offer full design and fabrication capabilities, as well as the timely deliveries our customers have come to expect. This is yet another in-house service that Photo Stencil has the capability to offer,” said Mike Burgess, stencil product manager.
Plastic laser-cut templates are a cost-effective and timely alternative to automated optical inspection equipment. Can be used for all board types including SMT, Pin Through Hole Technology (PHT) and combinations of both. The standard turn time is 24 to 48 hrs, depending on the verification of data received.
Photo Stencil, www.photostencil.com
Press Releases
- New Senate Bill Supports Reshoring and Restoring U.S. Printed Circuit Board Manufacturing
- Semi-Kinetics Brings on Colin Forgy to Lead Manufacturing at Idaho Facility
- Absolute EMS Expands Advanced Assembly Capabilities with SASinno Americas PF-6T High-Precision Connector Press-Fit System
- VJ Electronix Partners with The Murray Percival Company to Expand Support Across the Midwest