Products
Accutronic, a flat-belt-driven, powered live-roller accumulation conveyor with 24-volt electric actuation is said to offer quiet, positive transportation and true zero-pressure accumulation of cases, cartons and totes.
Reduces noise and removes lubrication requirements associated with chain-and-pad-driven live roller conveyor. 24-volt electric stepper motor lift mechanism eliminates the need for the compressed air, increasing installation flexibility and producing energy savings.
Features an automatic sleep mode, which disengages the drive if no product has rolled by in eight seconds, and detectors built into the photo-eye sensors that shut the system down five seconds after sensing a product jam. Photo-eye sensors, factory installed and aligned, and control modules are delivered ready to run.
Designed for medium-duty, high-speed accumulation lines. Offers speeds up to 400 ft./min. on transportation and up to 240 ft./min. on accumulation.
Weight capacity is 35 lb./ft. for live loads, 100 lb. per package. Provides release rates of up to 95% and acceptance rates up to 100%.
Available in three-, six-, nine- and 12-foot lengths with a standard zone length of three feet. Available widths between frames are 16", 22", 28", 34" and 40".
FKI Logistex North America, fkilogistex.com
Smart Sonic ultrasonic stencil cleaning process cleans at very low power density (watts/liter) as early research by GEC Marconi and the EMPF Laboratory indicated that lower power density equals higher safety.
Recent studies indicate that ultrasonic power densities of 10 watts per liter or less are desirable for the safe cleaning of populated PCBs. These stencil cleaners have always been rated at 10 watts per liter and still clean any type of solder paste from fine-pitch stencils.
Cleans all types of solder paste at low power densities due to the cleaning efficiency of their proprietary 440-R SMT Detergent and the mechanical efficiency of the ultrasonic transducers.
Smart Sonic, smartsonic.com
29 x 29" VectorGuard stencils allow customers to reduce changeover time and ease stencil handling and storage challenges in applications requiring a large image area.
The large format foils are available in popular thicknesses, including 0.005" (0.127mm) and 0.006"(0.152mm).
Customers can also use the 29 x 29" frameless system in machines that do not have an adjustable chase, including non-DEK machines, or where they prefer not to use side bar extensions. The system then becomes a straight swap for existing framed foils.
Customers invest only in the frame, which comes complete with a footpedal to control the air supply during mounting, and the foils themselves.
Extruded aluminium edges and plastic corners add rigidity and streamline frame mounting and tensioning, making larger foils feasible.
DEK, dek.com
Press Releases
- Does Over-Reliance on X-Ray Inspection Create Unintentional Component Damage?
- Kitron Autonomous Defence Systems Agreement Increased to EUR 12M
- Keiron Printing Technologies Appoints BarTron, Inc. as Sales Representative for Midwest and Ohio Valley Regions
- CalcuQuote rebrands within Elisa Industriq, strengthening a unified market presence