Aegis Industrial Software Corp. (Horsham, PA), a provider of manufacturing productivity software, has announced that the Key Electronics (New Albany, IN) has purchased the entire scope of Aegis software to support all factory information management from new product introduction (NPI) through manufacturing execution, quality, traceability and line monitoring. The electronic manufacturing services (EMS) provider has selected Aegis software to deliver efficient management of data from the factory office to the factory floor and from end-to-end of the product lifecycle.
Tom Hardy, Key Electronics president, said, "Our decision to partner with Aegis is the result of a deliberate effort to increase efficiencies and productivity for our customers as we grow as well as maintain aggressive quality levels....and demonstrates our commitment to leading edge technology, improved processes and total commitment to be the choice for original equipment manufacturers (OEMs) in the high mix/low volume marketplace."
Jason Spera, chief executive officer of Aegis, said, "Key Electronics and Aegis are both recipients of our industry's Service Excellence Awards, sponsored by Circuits Assembly. By standardizing factory-wide on the entire Aegis system, Key Electronics has invested to even further enhance their quality and the service they provide their customers. Both companies share a common vision; a single software platform spanning NPI to MES to the real-time machine data, and out to management and customer portals delivers real business advantage."
The deployment of Aegis software at Key Electronics provides a single source for all NPI engineering operations, including bill of materials (BOM) validation and program generation cross-line, and a single-database solution for MES and factory execution analysis. Quality data collection, automated repair and product tracking is automated through interactive and visual Web interfaces throughout the factory floor. The system joins this information to real-time data streaming from machines across the entire line—not just surface-mount placement—for real process visibility and traceability.
Copyright 2004, UP Media Group. All rights reserved.
Preco Electronics (Morton, IL), a provider of electronic manufacturing services, received ITM Process Certification for Class 2, Electronics Assembly.
ITM Consulting's (Durham, NH) principal consultants, Jim Hall and Phil Zarrow, conducted a series of operations and process audits and certified that the materials, equipment, processes and personnel comprising the Preco Electronics facility have met the standards set forth by ITM and represent best practices for the assembly of Class 2 electronic products. ITM determined that the printed circuit board (PCB) assembly operation within the Preco's Morton facility is capable of producing high-quality printed circuit assemblies in accordance with IPC-A-610, Class 2, Acceptability of Printed Circuit Boards.
Jim Lanigan, director of operations and engineering at Preco, said, "The significance of attaining ITM Certification is that it allows our customers to benefit from our sophisticated degree of technology for EMS products coupled with a high commitment to quality, all while enjoying the service level a world-class Tier 3 EMS provider can offer. The team at ITM conducted the audit and noted areas requiring enhancement or improvement. Our engineering, quality and production staff made the modifications and we attained certification."
ITM president, Phil Zarrow, said, "Preco's certification should help dispel the myth that only a Tier 1 EMS provider can have a world-class facility. Preco is the first North American EMS provider to receive ITM Assembly Process Certification."
PCB Assembly and PCB Fabrication Process Certifications are patent pending services provided exclusively through ITM Consulting.
Copyright 2004, UP Media Group. All rights reserved.
Transition Automation Inc. (Billerica, MA) released a new Permalex squeegee holder and blade assembly for EKRA printers.
The new design is specially created for E1, E4, E5 and X5 models of EKRA printers. The holders are adjustable and feature Transition Automation's unique sliding paste retainers. These retainers allow one holder to accommodate many different blade lengths. The new holder design accepts Permalex bare-blade replacement stock, eliminating the need for additional holders.
Transition Automation is an international manufacturer for the electronics assembly industry, supplying two distinct product lines: tooling services and squeegee technology.
Copyright 2004, UP Media Group. All rights reserved.
Cookson Electronics (Londonderry, NH) recently celebrated the expansion of its Polyclad Laminates electronics material manufacturing facility in Elk Grove, CA. More than 75 guests, including customers, state and local officials, media and company employees attended the event. A ribbon-cutting ceremony was followed by tours of the new manufacturing area and a buffet luncheon.
The expansion of Polyclad's Elk Grove laminate and prepreg manufacturing area represents an over $20,000,000 investment initiative by Cookson Electronics in the state of California. The operation will be a major resource to the Americas and Pacific Rim-based printed wiring board fabrication industry, providing material supply, service and support. Products manufactured at the site will include Polyclad low and high Tg FR-4 products, including the recently introduced FR-370HR lead-free assembly-compatible CAF resistant materials.
The plant's design includes vacuum presses, automatic build-up lines and automatic fabrication equipment. Additionally, new lean manufacturing and advanced scheduling practices will accelerate product delivery speeds and reduce excess inventory problems for customers. The new plant is 43,200 sq. ft. and situated on 8.3 acres. The real estate enables Cookson Electronics the opportunity to expand both manufacturing capacity and personnel to meet future customer demands.
Copyright 2004, UP Media Group. All rights reserved.
Siemens Dematic Electronic Assembly Systems Inc. (EAS, Norcross, GA) sponsored the Atlanta International School's (AIS's) International House of Technology (IHOT) in the For Inspiration and Recognition of Science and Technology (FIRST) Robotics Regional Championship competition held March 19-20 at the Gwinnett Civic and Cultural Center in Duluth, GA.
FIRST is an international program designed to inspire interest in the sciences and challenge middle school and high school students to use their creativity, knowledge and leadership skills to build robots to compete with other robots. Siemens Dematic supported the team by providing a facility, tooling and funds necessary to complete their project. The competition is designed to foster students' interest in science and technology and to help them apply classroom lessons to real-world situations. The partnerships developed between schools, businesses and universities promote an exchange of resources and talent and expose students to new career choices.
The IHOT team was successful at the tournament and won the Rookie All Star Award. With this award, the team is now eligible to advance to the National Competition to be held in the Georgia Dome on April 18.
Copyright 2004, UP Media Group. All rights reserved.
CSA International (CSA, Northbrook, IL) and Underwriters Laboratories Inc. (UL, Toronto, Ontario, Canada) have adopted an expanded Memorandum of Understanding (MoU) and completed the first phase of a mutual acceptance program for electrical components, the first milestones of an agreement the two testing organizations signed Nov. 10, 2003.
That agreement, which is designed to assist manufacturers in getting their products to Canadian and U.S. markets more quickly, without redundant testing, was the result of several months of negotiation between UL and CSA, with support from the National Electrical Manufacturers Association (NEMA), Electro-Federation Canada and major electrical manufacturers.
The expanded MoU covers 50 additional component and 11 additional end-products categories as well as all of the 13 product categories covered in the original 1996 MoU, allowing manufacturers to obtain both UL and CSA certification and listing with a single product test conducted by either company.
With the completion of the first phase of the component agreement, CSA and UL now accept several component categories for use in low voltage distribution and industrial control equipment. As many as 52 additional component categories and 11 additional end-product categories are being considered under the agreement.
A complete listing of components and end-products covered by the expanded MoU and the component acceptance agreement is available at: www.csa-international.org/components and www.ul.com/components.
CSA is a provider of product testing and certification services for electrical, mechanical, plumbing, gas and a variety of other products. UL is an independent, not-for-profit product safety certification organization that has been testing products for more than 110 years.
Copyright 2004, UP Media Group. All rights reserved.
Press Releases
- Indium Corporation Technical Expert to Present at SiP Conference China
- Flex Announces Kevin Krumm as Chief Financial Officer
- Green Circuits Enhances Inspection Capabilities with New DAGE Quadra 5 Pro X-ray System
- Western Digital CEO David Goeckeler Elected Chair of Semiconductor Industry Association