caLogo
Elpeguard SL 1307 FLZ series conformal coatings are 1-pack fast-drying polyacrylic resins for yellowing resistance. Cured ink film can be soldered through at soldering iron temperature; can be removed by means of the product-specific thinner. The colorless fluorescent adjustments are approved as permanent coatings per UL 94; meet requirements of IPC-CC-830B.
 
The Twin-cure DSL 1600 E-FLZ series has low viscosity thick-film lacquers. Offers corrosion protection. Meets requirements of UL 94 and IPC-CC-830B. Has short processing times. Thin protective coats of around 80 µm can be realized.
 
The yellowing-stable white-opaque photoimageable solder resist Elpemer SD 2491 SM-TSW and corresponding marking ink Elpemer SD 2691 TSW are applied by screen printing and developed in aqueous-alkaline media. The latter corresponds to the flame class V-0 according to UL 94, meets requirements of IPC-SM-840D and is halogen-free per JPCA-ES01-2003/IEC 61249-2-21.
 
Wepuran casting compound VU 4490/31 K is based on polyurethane resin and is yellowing-resistant. The smooth white surface gives a high-grade finish. Is said to be easy to process in mixing and dispensing equipment; can be processed by hand despite short pot life. Is said to be fast curing. After slight heating to 40°C, the potting can be removed from its mould after 10 min.
 
Lackwerke Peters, www.peters.de
Submit to FacebookSubmit to Google PlusSubmit to TwitterSubmit to LinkedInPrint Article
Don't have an account yet? Register Now!

Sign in to your account