Dispenses adhesives with and without filler, pastes, oils, lubricants, colors, lacquer, flux, solder resist or conformal coating. Almost all media with a viscosity between 50 and 200.000 mPas can be dispensed.
 
Unlike other needle based dispensing systems, the gap between the jet valve and the substrate can vary. Dispenser can travel at a fixed height while the substrate’s height changes. 
 
The volume of a single drop can be as small as 2 nl. Very thin ropes can be dispensed by jetting one drop next to the other or by dispensing into a thin needle. The valve can dispense media under pressure (up to 100 bar) and at high temperatures (up to 100 °C).
 
ESSEMTEC AG,essemtec.com

• Prev
• Next