caLogo

News

Finetech will highlight the Fineplacer Pico system in booth E1A02 during Nepcon China/EMT China on April 4-7.
 
The base module can be used in a wide field of applications for rework and different kinds of micro assembly, e.g. flip chip bonding. For micro assembly, it offers 5 µm (0.2 mil) placement accuracy, allowing die with a pitch down to 50 µm to be bonded. The rework configuration offers accessibility for nearly all large standard surface-mount components.
 
It is capable of both rework and assembly. It can be configured with a small passive rework application package that includes all rework steps: component removal, residual solder removal, paste dispensing and new component soldering. This configuration makes it possible to see 0201 or 01005 components using high-magnification optics. The optional integrated solder paste dispenser can dispense solder paste dots small enough for 01005 rework and can also be configured to dispense epoxy and underfill.
 
A second application package is available for mobile device rework. Comes equipped with a motorized placement module and can perform the entire rework process for the smallest of devices up to RF shield cans.
 
The flip chip bonding configuration includes additional process modules: a chip contact heating module, special heating plate and a bonding force module. Many flip chip applications can be supported, including eutectic and AuSn soldering, thermo compression and thermo/ultrasonic bonding, adhesive technologies, ACP (Anisotropic Conductive Paste), and Chip On Glass (ACF).
 
Features "WinCOMISS" software that controls bond force during placement and soldering.
 
 
Finetech, finetechusa.com
Submit to FacebookSubmit to Google PlusSubmit to TwitterSubmit to LinkedInPrint Article
Don't have an account yet? Register Now!

Sign in to your account