Products
ScanWorks toolkit for embedded instruments validates connectivity of DDR3 memory chips with certain Intel processors. Verifies performance of the bus that connects DDR3 memory devices to Intel’s processors based on the micro-architecture codenamed Sandy Bridge. Employs Intel IBIST embedded instrumentation to drive data patterns onto the bus that connects the processor to DDR3 devices. These patterns form the basis for tests that verify the read/write capabilities of the memory bus. Operational parameters on the bus such as voltage and signal timing can be modulated.
Asset InterTech, www.asset-intertech.com
LED BIN validation and traceability software validates SMT line setup by tracking each reel to its feeder and specified feeder location on the machine; ensures each replacement reel contains LEDs with a correct and compatible brightness index number. Generates traceability reports based on the BIN of each LED reel used. Forces the machine to stop processing when a process validation error occurs. Reduces machine downtime during product changeovers and feeder replenishments. Each component reel load/unload event is logged in a central database. Component-level data can be linked with the actual product/PCB lot number, work order or serial number.
Cogiscan, www.cogiscan.com
ThermoScan test sensor can be installed on a flying probe shuttle for general application or a probe module with Z-movement for more accurate measurement over ICs. Uses mechanical capability to automatically move IR temperature sensor over PCB to measure the powered PCB temperature pattern; bridges gaps between conventional test technologies. Can be used at every stage of the production process and for design verification; helps to optimize thermal distribution. Provides troubleshooting information for PCB repair. Measures and analyzes thermal behavior of single-sided and double-sided PCBs. Temperature range -18° to 220°C with a measurement accuracy of 3%. Sensor response time is 150 ms after 1 to 2 min. warm-up.
Acculogic Ltd., www.acculogic.com
Press Releases
- Aven Welcomes Max Ramos to Strengthen Distribution Partner Operations
- ubersmt Expands SMT Line with Juki G-Titan Printer and RS-1R Placement System
- Keiron Technologies to Host LiFT Webinar Focusing on Solving Solder Paste Printing Challenges
- Express Manufacturing, Inc. Strengthens Test Capability with Acculogic Flying Probe System