Products
Icon i8 fully automatic screen printer now includes an under-stencil cleaner. Features dual-vacuum cleaning changers. Solvent holes tube now is said to be easier to remove from the main under-stencil cleaner body. Offers pad-on-pad verification, using DEK Hawkeye camera and inspection software.
Icon Technologies, www.iconprinter.com
Icon Technologies, www.iconprinter.com
Kester 295 no-clean flux is halide- and bromide-free. Designed for cored solder wire. Conforms to IPC-TM-650, IEC61189-2, J-STD-004A and JPCA-ES-01. Is said to eliminate splattering; removes need for expensive cleaning. Residues are non-conductive and non-corrosive and do not require removal. Is available in a variety of alloys, wire diameters and flux percentages. Classified as type ROLO flux per J-STD-004A; can be used for Pb- and Pb-free soldering. Emits low smoke and odor. Recommend solder iron tip temperature ranging between 260-370°C for Sn63Pb37 and 350-400°C for Pb-free SnAgCu alloys.
Kester, www.kester.com
Kester, www.kester.com
Tape dispenser (item 81282) was designed for ESD tapes. Is made of stainless steel and holds tapes with 3" cores. Two separate spools turn independently to hold either a single 2" wide roll or two rolls 1" wide or narrower. All components can be grounded with ground cord. An integrated grounding jack can be used to plug in a wrist strap.
Desco, www.desco.com
Desco, www.desco.com
Press Releases
- Aven Welcomes Max Ramos to Strengthen Distribution Partner Operations
- ubersmt Expands SMT Line with Juki G-Titan Printer and RS-1R Placement System
- Keiron Technologies to Host LiFT Webinar Focusing on Solving Solder Paste Printing Challenges
- Express Manufacturing, Inc. Strengthens Test Capability with Acculogic Flying Probe System