Products
RFS-20 constantly recycles rinse water from stencil and batch cleaners, saving water, energy and disposal costs. The fully automatic system constantly filters the rinse water and returns it to the stencil cleaner for re-use, eliminating the need for evaporators, haulage or in-house wastewater treatment facilities. A four-stage filtration system cleans the rinse water and returns it to the cleaner.
Three-way valve allows the rinse tank fluids to be power drained when changing fluids during periodic maintenance.
Filtration system consists of an in-line solder trap, a 10-micron polypropylene filter, an activated carbon powder filter to remove organics and a 5-micron polypropylene filter for fine particulates and organics. Rinse tank water is constantly re-circulated, extending the bath life of both the wash and rinse tank fluids in the cleaner.
JNJ Industries, jnj-industries.com
The laser fan width control option provides closed-loop monitoring of the conformal coating process. Fan width is important to monitor to ensure consistent, repeatable coating patterns. The option is designed to work with the Century series conformal coating system and the patented SC-105/205 Film Coater applicator for low-viscosity coating materials.
Temperature variations and other environmental factors often affect the viscosity of coating materials, changing material flow and fluid fan width. Measures the fan width with a laser sensor and adjusts the system parameters as necessary. Can achieve edge definition of 0.76 mm (30 mil) and speeds up to 400 mm/sec (16 in/sec).
Asymtek, asymtek.com
The family of PXI instrumentation supporting extended boundary Scan Test strategies includes digital I/O modules, a mixed Signal I/O module and several power modules.
The family of digital I/O modules includes the PXI 5296 with 96 channels and the PXI 52196 with 192 channels. I/O channels are individually programmable as input, output, bi-directional or tri-state. The 32 channel groups are voltage-programmable between 1.8 and 5VDC. Each channel features a special protection circuitry to avoid interface damages due to high fault currents, and allows hot-swap capability. A differential I/O module PXI 5384 with 48 programmable channels is available.
The mixed signal I/O module PXI 5702 has two channels with 12-bit resolution for the generation or measurement of voltages. Can also be used as digital pin driver.
The PXI 5120x series of power modules includes five different models (3VDC, 5VDC, 12VDC, 24VDC and 48VDC). All have two separate channels with 50W output power each, and are voltage and current programmable. Feature galvanic isolation, load rejection relays, U/I read back and programmable current. Have an integrated U/I recorder per channel, synchronously operating to the BScan TCK clock.
The new suite supports the PXI trigger bus and, can be synchronized to the boundary scan test procedure.
GÖPEL electronic GmbH, goepel.com
Press Releases
- Weller Tools Celebrates 80 Years of Innovation with Special Black Edition WE1010 and ZeroSmog Shield; Philippe Buidin Comments
- Saki America, Inc. Appoints Mario Ramírez Galindo as Project Engineer in Mexico; Craig Brown Comments
- BEST Inc to Host Soldering 101 Workshop at Illinois & Michigan Locations
- Incap Corporation: Incap's Annual and Sustainability Report 2024 published