The IPC Association (Northbrook, IL) recently commended DEK's (Zurich, Switzerland) technological advances with its new via fill process. Awarded a slot in the Innovative Technology Showcase at the APEX exhibition in Anaheim, CA, DEK's 100% fill technology was described by the judges as groundbreaking.

As part of the new and emerging technologies showcase, the process delivers 100% fill of substrate vias with no voids and minimal surface residue. This Pro-Flow-based process offers solutions to problems such as insufficient fill, voiding, poor throughput and excessive handling of product.

The fully enclosed head is used in conjunction with a dedicated tooling fixture that ensures complete fill of vias in the minimum of print passes (typically two), with a paste pressure of 2.5 bar and a print speed of 25mm/s. In addition, the print material has been shown to have a life of over three months in the transfer head.

Traditional manual or squeegee-based systems are less clean and operator-friendly, and take multiple passes to push material into vias. They can also use a vacuum table to pull material through, resulting in both voids and inadequate deposition.

With results in throughput of over fives times faster than traditional squeegee-based fill processes, the system is repeatable and offers accuracy.

DEK is a global provider of advanced pre-placement manufacturing solutions and innovative deposition technologies for a wide range of electronic materials.

www.dek.com

Copyright 2004, UP Media Group. All rights reserved.

• Prev
• Next