VisionXP+ convection soldering system from Rehm Thermal Systems enables predictive maintenance

To achieve the best possible soldering results, the actual melting process of the solder paste isn’t all that matters: when soldering highly complex electronic components, the cooling of the component that is to be soldered plays an important role, too. The filter monitoring and volume flow control that is integrated in the VisionX series of convection soldering systems from Rehm Thermal Systems ensures effective residue management and constant cooling performance, thus supporting a stable and safe process atmosphere for soldering.

When melting the solder paste within the process chamber, process gases may arise; these in turn can contaminate the cooling modules and the fine filter. As a result, the volume flow of the cooling process (which should be as constant as possible) is restricted or reduced, thus causing an insufficient amount of process gas to be fed through the filter. At the same time, less gas means less cooling capacity, and this can lead to an increase in the outflow temperature – or to a change in the cooling gradient on the components. To ensure a safe and stable process, the correct outflow temperature and a constant cooling gradient of the soldered component are very important.

As part of predictive maintenance, via the integrated control system, the filter monitoring with active readjustment automatically detects if the volume flow falls below the flow rate that has been individually set by the customer for their production requirements. This indicates that a filter change is imminent. Until this change is made, the system automatically adapts the volume flow by means of active readjustment in order to reliably maintain the process by increasing the cooling capacity. For this purpose, the set gas flow rate in the process chamber is continuously compared with the value that is actually being identified.

Filter monitoring with active readjustment thus guarantees high process reliability and ensures an optimum reflow soldering process with constant flow conditions.

About Rehm Thermal Systems
Rehm is a technology and innovation leader in the state-of-the-art, cost-effective manufacturing of electronic assembly groups and specialises in thermal system solutions for the electronics and photovoltaics industry. Rehm is a globally active manufacturer of reflow soldering systems using convection, condensation or vacuum, drying and coating systems, functional test systems, equipment for the metallisation of solar cells and numerous customised systems. We have a presence in all key growth markets and, as a partner with almost 30 years of industry experience, we are able to implement innovative production solutions that set new standards.

Register now for PCB West, the leading conference and exhibition for printed circuit board design! Coming Sept. 9-12 to the Santa Clara Convention Center. pcbwest.com

• Prev
• Next