Assuming the corona situation could become critical again in this autumn, Emil Otto has taken precautions and ramped up disinfectant production in late summer to guarantee fast delivery. Furthermore, disinfectant gels with an alcohol content of over 90% were developed.

"In regard to disinfectants, our warehouses are well stocked, and we can deliver immediately", according to Markus Geßner, responsible for marketing and sales at Emil Otto GmbH. In view of rising infection numbers in autumn, the chemical company from Eltville has taken precautions. The disinfectants developed in the spring were pre-produced in large quantities so that they can be supplied immediately if demand increases again. The product range was also further expanded.

"We have developed flux gels with an alcohol content of over 90%. This is unique worldwide. In contrast to the usual disinfectant gels, our disinfectant gels are quickly absorbed, do not leave a sticky and unpleasant smelling lubricating film and are also skin friendly due to the addition of a glycerine component. Furthermore, the newly developed gels allow a more economical application, since they can be applied more easily than using purely liquid agents", explains Geßner.

Besides hand disinfectants, Emil Otto also offers surface disinfectants. The portfolio consists of agents using both ethanol and isopropanol. All products can be ordered in different packaging units, from the handy spray bottle for use in between to large containers for internal distribution. However, the guaranteed ability to deliver also applies to other products of the Emil Otto range. "In addition to the disinfectants, we can also supply all fluxes from our range quickly and reliably," says Geßner.

About Emil Otto

Since 1901 "Emil Otto" stands for top quality. As owner-managed company, Emil Otto is committed to the development and manufacturing of high-quality fluxing agents. In particular the fluxing agents for electronics production, strip tinning, cooler construction as well as for galvanizing are used by market leaders at home and abroad.

Over the years, reliable products and a high level of customer care have become the signature. The manufacturing takes place in accordance with the latest standards, the quality- and environmental management system has been certified for many years. Emil Otto responds with high flexibility to customer requests. Special products or product adaptations are developed and implemented in collaboration with system manufacturers and institutes. More information: www.emilotto.de

PCB West Virtual 2020 has more than 125 hours’ worth of technical sessions on printed circuit design and manufacturing available through Oct. 12.  pcbwest.com 

• Prev
• Next