TAIPEI -- Asustek Computer is forecasting a 77% jump in notebook production next year on higher demand for low-cost laptops.
The company hopes to ship some 20 million units next year. If so, it would make Asustek one of the world's four largest laptop makers, behind Dell, HP and Acer.
The company hopes to ship some 20 million units next year. If so, it would make Asustek one of the world's four largest laptop makers, behind Dell, HP and Acer.
NEW YORK – The low valuations of several big-name EMS firms suggests impending restructuring, an industry analyst said yesterday.
Celestica, Sanmina-SCI and Benchmark are all below historical norms and tangible book value, noted Sherri Scribner of Deutsche Bank Equity Research in a research note. This means Wall Street expects those companies will reduce overhead in the coming months.
“[T]rading below tangible book value suggests to us that the market expects some form of restructuring at these companies,” Scribner wrote. Sanmina-SCI and Celestica are trading below their cash values, she added.
While Sanmina-SCI’s profitability has increased measurably over the past year, the company is saddled with a 55% debt-to-capital ratio and high interest rates. The company carries $1.48 billion in debt, though none of it is due before June 2010, against $1.482 billion in cash and credit lines.
As of June, Celestica had $759 million in debt and $1.2 billion in cash and short-term investments.
Benchmark had $12 million in debt due in December 2012, and $289 million in cash and short-term investments, plus a credit line of $100 million.
Plexus had a $150 million loan due in 2013. It is the only significant debt the company carries. Plexus has more than $200 million cash on hand.
Flextronics actually carried more debt – $3.79 billion – than its competitors, but just $200 million is due before 2012, and the world’s second-largest EMS company had $1.77 billion in cash and short-term investments and more than $2 billion in credit lines available.
Celestica, Sanmina-SCI and Benchmark are all below historical norms and tangible book value, noted Sherri Scribner of Deutsche Bank Equity Research in a research note. This means Wall Street expects those companies will reduce overhead in the coming months.
“[T]rading below tangible book value suggests to us that the market expects some form of restructuring at these companies,” Scribner wrote. Sanmina-SCI and Celestica are trading below their cash values, she added.
While Sanmina-SCI’s profitability has increased measurably over the past year, the company is saddled with a 55% debt-to-capital ratio and high interest rates. The company carries $1.48 billion in debt, though none of it is due before June 2010, against $1.482 billion in cash and credit lines.
As of June, Celestica had $759 million in debt and $1.2 billion in cash and short-term investments.
Benchmark had $12 million in debt due in December 2012, and $289 million in cash and short-term investments, plus a credit line of $100 million.
Plexus had a $150 million loan due in 2013. It is the only significant debt the company carries. Plexus has more than $200 million cash on hand.
Flextronics actually carried more debt – $3.79 billion – than its competitors, but just $200 million is due before 2012, and the world’s second-largest EMS company had $1.77 billion in cash and short-term investments and more than $2 billion in credit lines available.
EL SEGUNDO, CA – EMS and ODM firms will continue to grow, albeit at a slower rate, during the current recession, says research firm iSuppli.
In fact, the firm believes, a recessionary environment may offer opportunities, pointing to the 2001-2003 recession, when a “rubber band effect” stimulated significant revenue growth for EMS/ODM firms emerging from the downturn. Top ODMs increased their annual sales from $12 billion to $37 billion during 2001-2004, while EMS providers had a CAGR of 11% during the period.
This same effect may apply this time around, as OEMs refocus resources on core competencies, investigate ways to minimize costs and shore up their balance sheets, says Adam Pick, principal analyst for EMS/ODM at iSuppli.
He and senior analyst for EMS/ODM services Jeffrey Wu will discuss how the deteriorating macroeconomic situation is impacting contract manufacturers in an Oct. 22 Webinar at 11:30 am EST.
For more information and registration, visit https://www1.gotomeeting.com/register/676924336.
In fact, the firm believes, a recessionary environment may offer opportunities, pointing to the 2001-2003 recession, when a “rubber band effect” stimulated significant revenue growth for EMS/ODM firms emerging from the downturn. Top ODMs increased their annual sales from $12 billion to $37 billion during 2001-2004, while EMS providers had a CAGR of 11% during the period.
This same effect may apply this time around, as OEMs refocus resources on core competencies, investigate ways to minimize costs and shore up their balance sheets, says Adam Pick, principal analyst for EMS/ODM at iSuppli.
He and senior analyst for EMS/ODM services Jeffrey Wu will discuss how the deteriorating macroeconomic situation is impacting contract manufacturers in an Oct. 22 Webinar at 11:30 am EST.
For more information and registration, visit https://www1.gotomeeting.com/register/676924336.
ARLINGTON, VA – Nearly 70% of electronics companies surveyed for a just-released Consumer Electronics Association study are actively recycling their products.
The trade group today announced the results of its first industry-wide consumer electronics environmental sustainability report. The report, Environmental Sustainability and Innovation in the Consumer Electronics Industry analyzes the progress of 64 companies toward greater environmental sustainability. The study assesses industry progress in adopting sustainable policies, practices and programs and highlights specific environmental accomplishments by leaders in the consumer electronics industry. It was conducted by research firm Technology Forecasters Inc.
“This study demonstrates the industry’s commitment to environmental sustainability through eco-design, energy efficiency, green manufacturing and electronics recycling,” said Gary Shapiro, president and CEO of CEA, in a press relesase. “We are proud of our accomplishments thus far, but there is still work to be done. We look forward to the day the consumer electronics industry fully achieves our collective environmental sustainability goals.”
Highlights of the study include:
- Decreased electricity use: Among companies that reported reduced electricity consumption, electricity usage declined by as much as 25% during the past three to four years.
- Relative greenhouse gas reduction: Among the major CE companies that reported greenhouse gas emissions from 2004-2007, seven of the 10 have achieved a reduction per $1 million in revenue.
- Strong recycling commitment: Among 64 electronics companies surveyed, 69% report they are actively recycling electronic products and components, and 38% report reuse of the electronics products they make or use. Together, these actions have helped to recycle nearly 800,000 tons of electronic waste.
- Improved energy efficiency: Continuous improvement across the industry in nearly every product. The widespread shift from CRT to LCD monitors that occurred earlier this decade reduced average energy use per monitor by about 30%.
This report covers the sustainable practices chain from the internal processes of the CE companies to manufactured end products. The report observes how improved designs have enabled the production of products that require less packaging, contain fewer harmful chemicals and allow for increased usability, recycling, and energy conservation. The report also examines companies’ adoption of lean manufacturing processes, the greening of manufacturing facilities, and improved supply chain practices. Through improved efficiencies and significant resource conservation, these practices have played an integral role in limiting waste. Researchers also noted successful community and environmental outreach programs initiated and maintained by CE companies, another critical piece of the sustainability puzzle.
“We’re confident that the industry that brought us such vital technologies as computers and mobile phones can also have a positive impact on the environment,” said Parker Brugge, CEA’s vice president of environmental affairs and industry sustainability. “CEA is committed to providing the resources to support industry efforts toward environmental sustainability.”
The full report is available at www.CE.org/green.
ARLINGTON, VA – Consumer spending on electronics will grow 3.5% in the fourth quarter, down 50% year-over-year, the Consumer Electronics Association revealed in a report set to be released today.
ROCKVILLE, MD – Rochester Electronics has established a Design and Technology Group here, expanding its capability to recreate semiconductors discontinued by the original manufacturer.
The new group specializes in ASIC designs and can reverse-engineer products where original tooling and intellectual property is missing or unavailable. Rochester has licensing deals in place with original component manufacturers to support these activities, the company says.
"There are many devices discontinued by the original manufacturer that are critically required in systems needing a long term support solution. In many cases, there simply is insufficient inventory of finished devices or die," said Curt Gerrish, Rochester founder and CEO. "Through Rochester's authorizations and licensing from the original manufacturer, we are able to recreate the device from the manufacturer's IP or through device reverse engineering."
"There are many devices discontinued by the original manufacturer that are critically required in systems needing a long term support solution. In many cases, there simply is insufficient inventory of finished devices or die," said Curt Gerrish, Rochester founder and CEO. "Through Rochester's authorizations and licensing from the original manufacturer, we are able to recreate the device from the manufacturer's IP or through device reverse engineering."
Press Releases
- SIA Applauds CHIPS Act Incentives for Amkor Facility in Arizona
- ASMPT and IBM Deepen Collaboration to Advance Bonding Methods for Chiplet Packages for AI
- Murray Percival Company Expands Product Line with Representation of BIMOS ESD Seating in the Midwest
- Selectronic Assembly Welcomes Eliud Herrera as Production Manager