HUDSON, NH – CeTaQ America has launched a mobile version of its metrology service, bringing machine capability analysis testing and verification services to a manufacturer’s facility.
This portability, says general manager Michael Sivigny, is not only fast and convenient, but is necessary for accuracy, and brings immediate solutions to the customer whose process may be out of control, or who may be experiencing problems due to a production machine being out of calibration.
“Testing directly at the machine also ensures optimum accuracy of the results,” he said. “There is nothing to transport, no risk of test samples moving or repositioning. We bring all of the key technology of our CmController system right to the contract manufacturer’s or OEM’s facility, and perform a complete evaluation and analysis right there on their production floor using our mobile metrology unit. This has tremendous value to the customer, because it provides an immediate solution – and immediate answers.”
He did not disclose the pricing schedule for the service.
The testing firm's novel hardware and software quality tools that analyze machine capability, checking the basic settings and functions of the equipment to identify, control, and correct failures, so that production machines can once again assemble product within the original quality specifications established by the manufacturer.
This portability, says general manager Michael Sivigny, is not only fast and convenient, but is necessary for accuracy, and brings immediate solutions to the customer whose process may be out of control, or who may be experiencing problems due to a production machine being out of calibration.
“Testing directly at the machine also ensures optimum accuracy of the results,” he said. “There is nothing to transport, no risk of test samples moving or repositioning. We bring all of the key technology of our CmController system right to the contract manufacturer’s or OEM’s facility, and perform a complete evaluation and analysis right there on their production floor using our mobile metrology unit. This has tremendous value to the customer, because it provides an immediate solution – and immediate answers.”
He did not disclose the pricing schedule for the service.
The testing firm's novel hardware and software quality tools that analyze machine capability, checking the basic settings and functions of the equipment to identify, control, and correct failures, so that production machines can once again assemble product within the original quality specifications established by the manufacturer.
Taipei -- Hon Hai Precision is expected to retain its position as Taiwan's largest electronic manufacturer in terms of sales in the first quarter of this year, according to Chinese news source CENS. Following Hon Hai are Quanta Computer, Asustek Computer Inc., Compal Electronics Corp. and BenQ Corp.
Hon Hai expects $6.15 billion in sales in Q1, up 40% year-on-year. Quanta estimated it would see first-quarter sales grow 30% to reach $3.07 billion. Asustek projects 20% growth to $2.76 billion, and Compal said sales would rise 10% to $1.72 billion. Thanks to its merger with the handset unit of Siemens AG, BenQ is expected to snatch 80% annual growth in sales, hitting $1.47 billion.
Hon Hai expects $6.15 billion in sales in Q1, up 40% year-on-year. Quanta estimated it would see first-quarter sales grow 30% to reach $3.07 billion. Asustek projects 20% growth to $2.76 billion, and Compal said sales would rise 10% to $1.72 billion. Thanks to its merger with the handset unit of Siemens AG, BenQ is expected to snatch 80% annual growth in sales, hitting $1.47 billion.
Moorpark, CA -- Tier two EMS company CTS Corp. is establishing manufacturing operations in Matamoros, Mexico. Production is expected to start in mid-2006 and will focus on electro-mechanical and system integration.
The Matamoros facility marks the fourth EMS manufacturing site in North America, in addition to Moorpark and Santa Clara, CA, and Londonderry, NH. CTS has manufactured components and sensors in Matamoros for nearly 40 years.
The Matamoros facility marks the fourth EMS manufacturing site in North America, in addition to Moorpark and Santa Clara, CA, and Londonderry, NH. CTS has manufactured components and sensors in Matamoros for nearly 40 years.
ST. LOUIS -- LaBarge received a $2.3 million contract from BAE Systems to produce power control enclosure assemblies for the M113 armored personnel carrier.
The company expects production to begin in April and continue through Sept. 2006 at its Huntsville, AK, facility.
Atlanta —The Atlanta Surface Mount Technology Association (SMTA) Expo will return to the Gwinnett Civic Center in Duluth on April 20. The free event will feature over 75 industry supplier exhibits, as well free technical presentations.
The morning sessions will feature a look at the electronics supply chain from Mike Buetow, editor-in-chief of Circuits Assembly, followed by a look at the realities and logistics of implementing Pb-free technologies, presented by industry expert (and Circuits Assembly columnist) Phil Zarrow. One of the afternoon sessions will focus on selective soldering techniques, and the second one on strategies for purchasing and increasing lead times in an RoHS environment.
The event also includes a free lunch on the trade show floor for pre-registrants, as well as a 10th anniversary celebration, sponsored by World Micro Components, Inc. A charity raffle to benefit The Joseph Sams School, a private, non-profit school in Fayetteville, is also planned.
Register in advance at: smta.org/education/vendor_days/vendor_days.cfm#ga
The morning sessions will feature a look at the electronics supply chain from Mike Buetow, editor-in-chief of Circuits Assembly, followed by a look at the realities and logistics of implementing Pb-free technologies, presented by industry expert (and Circuits Assembly columnist) Phil Zarrow. One of the afternoon sessions will focus on selective soldering techniques, and the second one on strategies for purchasing and increasing lead times in an RoHS environment.
The event also includes a free lunch on the trade show floor for pre-registrants, as well as a 10th anniversary celebration, sponsored by World Micro Components, Inc. A charity raffle to benefit The Joseph Sams School, a private, non-profit school in Fayetteville, is also planned.
Register in advance at: smta.org/education/vendor_days/vendor_days.cfm#ga
Delhi -- Flextronics will become a preferred manufacturing partner for SemIndia Inc., a chip manufacturing consortium working with Advanced Micro Devices, the Indian government, Government of Andhra Pradesh and the India Semiconductor Association.
Flextronics will manufacture electronic products for SemIndia and SemIndia will manufacture semiconductor chips for the various products that Flextronics manufactures in India (including chips for cell phones, set-top boxes and PCs).
Flextronics will manufacture electronic products for SemIndia and SemIndia will manufacture semiconductor chips for the various products that Flextronics manufactures in India (including chips for cell phones, set-top boxes and PCs).
Press Releases
- Surf-Tech Manufacturing Corp. Ensures World-Class Quality with Advanced Conformal Coating Services
- Luminovo Partners with Sluicebox to Offer an Industry-First Instant Product Carbon Footprint for Electronics
- The Assembly Show and SMTAI Announce Colocation in October
- SIA Applauds CHIPS Act Incentives for GlobalWafers Projects in Texas and Missouri