ST. LOUIS – Viasystems Group says it has completed its $283 million acquisition of DDi Corp.
Viasystems originally announced the acquisition April 4.
The combined company provides a North American manufacturing presence serving high-mix, low-to-medium-volume manufacturing.
The company now has more than 15,600 employees and manufacturing floor space exceeding 4.3 million sq. ft. in China and 1 million sq. ft. in North America.
OYSTER BAY, NY – ABI Research forecasts 208 million phablets will be shipped globally in 2015.
Global shipments for phablets (with a touch screen size between 4.6" and 5.5") will increase by a factor of 10 in 2012 from 2011.
Despite the slow start for phablet smartphones in 2011, the research firm believes the market is at the dawn of the phablet era. HTC, LG and Sony will each introduce phablet smartphones in 2012, joining the ranks of Samsung’s Galaxy Note and Nexus. Samsung will also release the Galaxy S3 by the end of May, ABI says.
With the predicted boom of phablet devices over the next two to three years, media tablet manufacturers may be worried, says ABI. In 2011, 65 million media tablets were shipped globally. More than 100 million media tablets are projected to be shipped globally in 2012. ABI Research believes hybrid smartphone/tablet will compete only with the smaller media tablet (below 7"). These smaller media tablets are forecasted to remain the smallest segment of the total media tablet market.
ROCHESTER, NY – PCB Cleaning: Challenges & Solutions is a free one-day cleaning workshop, scheduled for June 26 at the Rochester Institute of Technology.
This event aims to answer many common questions about cleaning and cleanliness testing.
For more information, visit http://events.r20.constantcontact.com/register/event?oeidk=a07e5yx9ulm746ce0a3&llr=afhm8xcab.
The workshop is presented by Aqueous, Zestron, Kester and Austin American Technology.
ATLANTA, GA – UP Media Group, publisher of CIRCUITS ASSEMBLY, today announced the opening of the Jim D. Raby Hall of Fame for Electronics Assembly.
SANTA CLARA, CA – RF and microwave printed circuit board design and manufacture are among the leading topics at the upcoming PCB West 2012 technical conference and trade show.
NORWOOD, MA – Advanced Thermal Solutions has published a paper that compiles 17 methods used by engineers for measuring thermal conductivity in electronics.
In one section, these methods are grouped according to the time dependence of the heat applied to the sample. Each method is classified under steady-state, periodic or pulsed. Another section compares the performance of each thermal conductivity measurement method, and provides an idea of sample size and preparation, and the operator skill required. There is also a list of the equipment typically needed to conduct each of these thermal tests.
Avoiding complicated boundary conditions, irregular part geometry, difficult heater placement/construction and encouraging the task of one-dimensional heat flow will simplify the measurement process, ATS says.
For more information, visit www.qats.com.
