Dymax Multi-Cure 9451 conformal coating is a "true" black material -- a single-component, 100% solids, light and heat curable conformal coating. Is designed to enhance security on PCBs. Improves circuit reliability in harsh conditions. Opaque black color is intended to cover markings, labeling, other identification as well as sensitive information on the PCB. Formulated with a secondary heat cure, can typically be applied and cured at up to 5 mils thick -- in one pass -- for applications where shadow areas exist. Is dispensable; and can be applied in multiple passes for thicker coating requirements. Immediately tack-free after curing. Applies to glass reinforced epoxy laminates, glass and stainless steel. Complies in full with RoHS Directives 2002/95/EC and 2003/11/EC.

Dymax, dymax.com

Sarcon GAR glass fabric-reinforced thermal interface material delivers thermal conductivity of 3W/m°K, while exhibiting a thermal resistance as low as 0.17°Cin²/W. Is for complex die-cut shapes and exerts a low force on components, as it fills air gaps between the heatsink and board-level heat sources. Comes in three thicknesses: 0.2, 0.3, and 0.45mm; is offered in rolls, pre-cut sheets or can be die-cut.  V‐0 equivalent thin film is recommended for applications with operational temperatures from ‐40°C to +150°C.

Fujipoly America Corp., www.fujipoly.com 

MP2 all-in-one DPSS laser marking system is for applications requiring high resolution but not high-speed throughput. Diode pumped solid state (DPSS) provides pulse duration of 3ns, high peak power of 30kW and runs on 24 VDC (6A). The 1064nm infrared wavelength is suited for marking a range of materials – metals, plastics and some organics. Includes laser beam scanning optics (galvanometer), control electronics and marking software. Optional laser safe enclosure.

LNA Laser Technology, lnalaser.com/dpss-laser-marking-system

Compliance Map Origin Determination Module is said to to simplify origin tracking within a complex manufacturing supply chain. Through a single dashboard, allows monitoring of an entire supply chain for compliance and quickly identification of country of origin. Substantial transformation calculations provide traceability with calculated origins rolled-up through bill of materials data. Is targeted at electronics and medical device manufacturing companies, especially components used in electronics assembly. Automatically collects country of origin data from the supply chain, applying rules of origin such as determining if the product was wholly produced in one country or if Substantial Transformation took place. Criteria such as Regional Value Content analysis can be automated to roll through the BOoM and provide a calculated and accurate origin determination. Integrates with source data, such as PLM/ERP and warehousing systems, for up-to-date, accurate and traceable origin determination. Automatically reviews tariff changes based on BoM and supply chain information and marks products appropriately.

The Compliance Map, thecompliancemap.com