DCA-HT modified silicone conformal coating has an operating temperature range of -70ºC to +200ºC and a high resistance to most solvents, lubricants and chemicals associated with aerospace and automotive applications. Is resistant to mold growth and UV light; can be sprayed, dipped or brushed. Cured coating meets DEF-STAN 59/47 and IPC-CC-830 and is RoHS compliant. Adheres under high altitude, decompression, moisture and salt spray.

Electrolube, www.electrolube.com

XL-1600 overlaminating film is a 0.002" clear film with 0.001" high-temperature adhesive protects labels in high heat applications. XL-1601 0.002" clear film with 0.001" ultra-high temperature adhesive is for extreme cold, hot or chemical exposure. Said to be dimensional stable and resistant to organic solvents and chemicals.  For environments above 125°C and short-term temperature spikes up to 300°C.

Polyonics, www.polyonics.com

TS1254 mid-sized pressure pot accommodates low to medium viscosity fluids, including solvents, adhesives and cyanoacrylate. Comes with pressure relief (safety) valve and stainless steel chamber, airtight lid seal and exhaust valve to depressurize after operation. Material feed line is located in center of lid to permit a direct and continuous feed path from material container to valve inlet. Comes with ¼" (6 mm) Teflon tubing; optional 4 mm tubing kit available.

Techcon Systems, www.techconsystems.com

X7056 simultaneously performs inline AOI and x-ray inspection. Detects concealed defects and can be used for on-demand verification. X-ray unit can be used to selectively verify individual defects during inspection tasks that primarily require an AOI with high throughput. Can use x-ray inspection for nonwettable stamped edges with QFPs. Inspects BTCs such as QFNs, and can be employed for balancing.

Viscom, www.viscom.com