New options to the FeederMaster system include upgraded software and an enclosed camera. The software is said to allow the user full control, including programmable zoom facility. Permits each lane to be calibrated at a selectable speed so that the initial calibration can be carried out at a speed that suits the operator and the complete feeder can still be tested at full speed later. Is said to be important for smaller components such as 0402 and 0201 passive case sizes. An optional variable LED Light Ring is available. Has motor power monitoring during calibration.
AlternativeSMT, www.feedermaster.com or www.alternativeSMT.com
Benchmark 2.0 machine operating software enhances post-print inspection, integrates barcode scanning for product traceability and process verification, singulates processing of indexed Auer boat substrates, and supports CAMX machine data-streaming per IPC-2541. Available on MPM Accela printer. Includes SpeedVision high-speed inspection architecture that improves board area inspection quantitatively (with data), reportedly at line speeds.
Speedline Technologies, www.speedlinetech.com
Indium5.1AT no-clean Pb-free solder paste offers low voiding at via-in-pad (reported 5% range over many different profiles with BGAs), printability, wetting and a robust reflow profile window. Formulated to minimize impact of downtime on printed deposit volumes.
Indium Corp., www.indium.com
1H20 AR3 water-based conformal coating is a high solids, fast drying, water-based acrylic for high volume, inline dip coating. Electrical properties are said to be comparable to solvent-based acrylics; adhesion properties and chemical and solvent resistance are reportedly superior. Meets MIL-I-46058C, IPC-CC-830 and UL746. Also comes as spray.
Humiseal, www.humiseal.com
Aegis Traceability and Control Validation Kit validates manufacturers’ plant traceability and control. Provides physical materials and procedural guide to determine a factory’s traceability and control capability, and rates the results in a formalized matrix. These ratings demonstrate manufacturers’ capabilities, communicate these capabilities to customers or auditors, and provide a starting point for improving capabilities.
The CHA-500 12-zone reflow oven is said to consume less than 200 L/min nitrogen when oxygen level is 800 ppm. Reportedly achieves temperature rise time in starting and profile changeover within 15 min. Flux filtration system contains chiller, enabling 2-5C per sec. cooling. High filtration fluxer reduces pot cleaning to 1 to 3 months.
Wave Point, www.wp-wavepoint.com
