caLogo

The IPC Association (Northbrook, IL) recently commended DEK's (Zurich, Switzerland) technological advances with its new via fill process. Awarded a slot in the Innovative Technology Showcase at the APEX exhibition in Anaheim, CA, DEK's 100% fill technology was described by the judges as groundbreaking.

As part of the new and emerging technologies showcase, the process delivers 100% fill of substrate vias with no voids and minimal surface residue. This Pro-Flow-based process offers solutions to problems such as insufficient fill, voiding, poor throughput and excessive handling of product.

The fully enclosed head is used in conjunction with a dedicated tooling fixture that ensures complete fill of vias in the minimum of print passes (typically two), with a paste pressure of 2.5 bar and a print speed of 25mm/s. In addition, the print material has been shown to have a life of over three months in the transfer head.

Traditional manual or squeegee-based systems are less clean and operator-friendly, and take multiple passes to push material into vias. They can also use a vacuum table to pull material through, resulting in both voids and inadequate deposition.

With results in throughput of over fives times faster than traditional squeegee-based fill processes, the system is repeatable and offers accuracy.

DEK is a global provider of advanced pre-placement manufacturing solutions and innovative deposition technologies for a wide range of electronic materials.

www.dek.com

Copyright 2004, UP Media Group. All rights reserved.


Submit to FacebookSubmit to Google PlusSubmit to TwitterSubmit to LinkedInPrint Article
Don't have an account yet? Register Now!

Sign in to your account