SFX-TAP4/CR is the newest member of Scanflex TAP transceivers, developed for integration in Flying Probe Testers (FPT) offering four parallel independent TAP.
 
This seventh TAP transceiver can be freely combined with all Scanflex controllers on PCI, PXI, USB or LAN basis, with distances up to five meters. Each TAP offers programmable input and output impedance, stepwise (250Hz/1MHz) programmable TCK frequency to 80MHz, programmable delay compensation, read-back of output signals and a relay controlled power signal. This enables an optimal UUT configuration over distances up to 1.5 m. Feature captive CION interface chips (ASIC) and additional safety measures. Features 32 voltage-programmable dynamic I/O, two analog I/O channels, three statistic I/O and trigger lines.
 
All TAP signals and PIO channels are galvanically isolated from the UUT, and can be tested for operation directly in the system by means of an integrated Built-In-Test (BIT).
 
The transceiver has a particular slot for coupling with Scanflex I/O modules; or various SFX I/O modules can be connected via an SFX/LS interface.
 
Supported by software System Cascon from version 4.2.1 on and is compliant with standards IEEE 1149.1, IEEE 1149.4, IEEE 1149.6, IEEE 1532 and JESD71. The software automatically recognizes the transceiver by the AutoDetect Feature. 
 
GÖPEL electronic, www.goepel.com

• Prev
• Next