MEP 6T servo electric press specializes in the application of compliant pin connectors to PCBs.
 
Uses a PC-controlled servo drive to control and monitor force, position and speed throughout the press cycle. By monitoring the entire press cycle, it can determine if a connector is being applied incorrectly and stop the process to avoid scrap and rework. Complete press cycle data can be stored for each connector applied to provide full traceability for the entire PCB.
 
Programming is provided through a Windows interface with database-driven software. Each connector can be pressed to a different level of force or distance without any operator setup.
 
Connectors can be terminated on force or distance while providing control of the speed of the press cycle, including the ability to dwell for a specified time. Can be used in applications other than press-fit connectors such as PEM nuts, rivets and heat sinks.
 
Provides up to 6 tons of pressing capacity, can accommodate PCBs up to 24 x 36". The 10" wide press ram allows for the mass-termination of more than one connector (of the same type) in a single press stroke. Options include an air table to allow for easy PCB movement and tooling stack up, tool-in-place sensor to ensure proper tool location and complete turnkey solutions including insertion tooling and PCB fixtures.
 
Tyco Electronics, tycoelectronics.com
Booth 1029

• Prev
• Next