K4000 PCB singulator depanelizes skip routed PCB panels up to 24" long. Simply place the bottom scoreline of the PCB onto the linear blade and step on a guarded foot switch to bring the circular blade across the top scoreline for clean separation of the PCB panels. Right and left blade guards assure operator safety. The front and back support and take up table are height adjustable.
 
Available with optional light beam safety curtain across the front of the blades for additional operator safety, and a conveyor belt to bring singulated PCBs to the side for easy removal. An infrared sensor on the end of the conveyor will stop the belt for PCBs with components on them. Scrap pieces will pass underneath the sensor beam into a discard bin.
 
Tooling to help the operator align panels is also available.
 
R100 is a high-speed, tabletop PCB router with built-in dust extraction channels. Can be used to finish singulating tab-routed PCB panels by manual operation. Two guide pins, one in back of the router bit and one in front of the router bit assure that the board will move past the router bit along the line of the routing channel, for clean, straight separation of the panel. The front guide pin can be brought in and out from the tooling bit to match the tab size on the PCB. Rotating the guide pin positioning collet will let the operator match the curvature of the cutting path to that of a round PCB panel.
 
Can be used as back up for high-volume routing or punch systems. In-house dust extraction vacuum can be connected to the tool, or a dust extraction vacuum is available separately.
 
FKN Systek, FKNSYSTEK.com

• Prev
• Next