Ready-to-use temperature sensors are available from stock for immediate delivery, in a variety of thermocouple and platinum RTD configurations.  Configurations include immersible and surface sensors.  RTD resistances are 100 or 1000 ohms.  Lead wires are in either two- or three-wire configurations with one-meter length.
 
Ideal for testing, prototype and pre-production applications. 
 

RdF Corp., rdfcorp.com

DEK has enhanced the machine maintenance and monitoring features of Interactiv Internet-based support, to allow remedial actions to be planned during scheduled maintenance visits.
 
Machine owners can also call-up the service history of each machine in the enterprise by remotely accessing the Merlin database, and can identify and check availability of spare parts and upgrades while standing at the machine.
 
The new predictive maintenance capability is enabled by ISCAN (Intelligent Scalable Control Area Network) , which enhances control and monitoring of machine subsystems and is featured on the latest Instinctiv and Micron-class machines. The CAN fieldbus allows monitoring of subsystem parameters, such as operating voltages and temperatures, which is stored in on-board memory. Using Interactiv to analyze this data remotely allows a range of subsystem conditions to be anticipated before failure. Maintenance or replacement can then be planned to coincide with a regular maintenance visit.
 
DEK,  dek.com

PEM fasteners for thin stainless steel sheets provide solutions for attachment applications where corrosion resistance and thinner, lighter designs must be satisfied. Typically specified for assemblies in challenging environments, including the medical and foodservice industries.

Self-clinching fasteners in the product line made from 400 series stainless steel include PFC4 panel fasteners, which incorporate captive screws to reduce loose parts; SO4 through-hole threaded standoffs (available unthreaded for spacing multi-panel assemblies); BSO4 blind threaded standoffs designed for stacking or spacing; and FH4 flush-head studs.

The product line also includes SP PEM 300 nuts, whose corrosion resistance is similar to 300 series stainless steel. All are machined from specially hardened stainless steels and can be installed permanently in stainless sheets as thin as .030”/0.8 mm.

Non-clinch fasteners for use in stainless steel include PFS SNAP-IN panel fasteners -- which can be installed without tools -- and PFF HYBRID floating panel fasteners featuring a flare-mount design to enable “floating” in mounting holes.

PennEngineering Fastening Technologies, pennfast.com

The 1263 SMT Box Receptacle is a horizontal terminal, and the 1265 SMT Box Receptacle is a vertical terminal. Both have entry capability on either end, and offer a small footprint, high current rating, high locational tolerance, low insertion force and a reliable connection by way of a high pressure contact area.

Current rating is 3 amps and mates with a 0.025" square or round pin with entry on either end. Can accommodate a minimum of twelve mating cycles without degradation.

Designed for automation with existing pick-and-place equipment and the Surf-Shooter SMTT feeder system—to avoid fixturing and hand placement. Available in surface-mount tape pockets for use with a standard tape and reel feeder.

Zierick Manufacturing Corp., zierick.com

Lightspan brand products are specialized fluids, gels, coatings, thermosets and encapsulation materials for refractive index matching. They encompass a range of materials at the same refractive index, including those resistant to fuels, solvents and other harsh environments, providing material options when matching a refractive index.

LS-5238-10 is an optical fluid composed of chemically inert synthetic polymers. Typical applications include projection display components, metrology fluids and testing and troubleshooting.

LS-3238 is an ultra-clear encapsulation gel composed of a cross-linkable synthetic polymer fluid designed to protect sensitive photonics and electro-optics from dust, moisture and mechanical vibration. Typical applications include light pipe cladding, encapsulation and fuel resistant sealing.

NuSil Technology Inc., nusil.com

The KIC Wave Surfer is a wave solder machine profile fixture with five embedded thermocouples. It works with the SlimKIC 2000 for quick, easy profiling and set-up of wave solder machines.

The system joins a host of recent introductions that has enabled the transition of the SlimKIC 2000 from primarily a reflow tool to a universal thermal process tool for cure, rework and wave solder.

Is designed to be used repeatedly in the wave solder machine. Holds the SlimKIC in place during each run to measure pertinent process data, including peak temperature, dwell time, parallelism and conveyor speed.

KIC, kicthermal.com

ProtoMat S62 circuit board plotter delivers prototyping capabilities at an entry-level price, reducing board production time while increasing overall accuracy and ease-of-use. Combining its maximum milling speed of 6" (150 mm)/sec. with its system resolution of 0.01 mils (0.25 µm) and 62,000 RPM spindle motor, the plotter produces extremely fine traces for all types of PCBs, including RF and microwave boards.

 

Has integrated head lighting and a 10-position automatic milling tool changer. Its motorized z-axis drive independently moves the plotter milling head over multiple axes, providing 3-D plotting capability for machining front panels and housings. Does not require external compressed air or chemicals, is enclosed by a soundproof acoustic cabinet. Optional accessories include a fiducial recognition camera system for automatic front-to-back alignment and an integrated vacuum tabletop for mounting PCB substrates on the plotter.

 

LPKF, lpkfusa.com

YTX-5000 in-line automated x-ray inspection system combines both AOI and x-ray inspections (AXI).  Inspects for visible and hidden defects on BGAs, flip chips and other area array devices. Other typical inspections include solder joints, leads, component presence and position, correct part, polarity, color and through-hole parts.  Features include auto-zoom 130Kv x-ray, enhanced AOI capability, off-line programming and real-time SPC data collection. 
 
Its image processing technology integrates normalized correlation and rule-based algorithms to provide inspection coverage with a low false failure rate. 
 
Uses a standard package library; remote programming maximizes machine utilization while real-time SPC monitoring provides yield enhancement.
 
YESTech, yestechinc.com

SKF profile rail guides reportedly provide precise positioning, smooth operation, high load-carrying capacity, high stiffness and unlimited stroke for linear motion applications in the semiconductor, electronics and medical industries.
 
Feature four precision-ground raceways and a slide unit with four ball circulation paths. The square configuration of raceways results in a guidance system with good rigidity able to accommodate equal load capacity in all directions. Incorporate a two-point contact of rolling elements with the raceways promoting high-speed operation, quiet running and low friction.
 
Includes high-performance, heavy duty, compact, medium and miniature series. Each is available with various slide configurations (normal, wide, long) and lengths.  Different carriage designs can meet particular load and stiffness demands (long carriages promote higher load-carrying capacity and wide carriages promote higher moment stiffness).  Guides with specific preload can be supplied.
 
SKF Motion Technologies, linearmotion.skf.com

Consulting and research firm CIMdata today released a new product review paper entitled, "Product Visualization Across the Extended Enterprise."
 
Co-authored by Ed Miller , president, and senior consultant John MacKrell, the paper explores the benefits of employing visualization and collaboration solutions across the extended enterprise using several real-life case scenarios. It also illustrates how AutoVue's visualization and collaboration facilitate global product development by providing enterprises in all industries with the ability to view, print, mark-up and collaborate on all data types throughout their product definition processes.
 
"The AutoVue family of visualization and collaboration products from Cimmetry Systems is a very powerful set of solutions," said MacKrell. "It delivers a mix of capabilities that enables it to support review, analysis, approval and verification activities on all kinds of product definition information throughout the extended enterprise of companies, their suppliers, partners and customers. Cimmetry has a track record of being attentive to customer needs and over the years has developed a line of robust visualization and collaboration applications to address the needs of product development and manufacturing organizations in industry segments as diverse as discrete manufacturing, high tech, AEC and process plant design."
 
AutoVue provides native viewing, printing, markup, digital mockup and real-time collaboration support for more than 450 engineering drawings, 2-D CAD, 3-D CAD parts and assemblies, PCB layouts and schematics and office documents without requiring the authoring applications. It integrates with several Document Management, PLM, Product Data Management, ERP, Workflow, ASPs and e-business Portals, either directly or via the Web.
 
Cimmetry Systems Inc., cimmetry.com

Model 2600-035 Tip-Seal valve for precision dispensing of medium- to high-viscosity adhesive and sealant materials opens and closes the material passage at the tip of the nozzle to precisely start and stop material flow, and prevent oozing and dripping. Combined with positive-displacement meters delivers precise shot volumes and exact bead profiles.

Use with materials that air dry or cure, such as silicones or polyurethanes. Sealing at the valve's tip prevents material from hardening in the nozzle. Can be used in high-speed stitching or repetitive on-off applications where short segments of material are deposited onto a surface.

Material is delivered to the valve by a metering assembly or under regulated pressure from supply tanks or pumps. The dispense rate can be altered during the dispense process to provide a variety of bead-profile sizes and material-flow rates.

Material is delivered to the valve by a metering assembly or under regulated pressure from supply tanks or pumps. The dispense rate can be altered during the dispense process to provide a variety of bead-profile sizes and material-flow rates.

Pneumatically actuated, the valve has large fluid inlet and outlet ports and wear-resistant fluid seals to extend its life. The valve's body slots and precision dowel holes allow easy and accurate mounting.

Sealant Equipment & Engineering, sealantequipment.com

 

Model 4040 Tandem-Cutterhead Large Cable Stripper with a pneumatic drive provides power for stripping tough insulations, such as cross-linked polyethylene, Teflon, Nylon and other wrapped or extruded insulations. Dual-port, six-stage cutterhead provides up to 1,800 psi of force to cut through insulated copper up to 0.625 in. O.D. (16 mm).  Step-stripping providesstrip lengths of up to 9.99" on the trailing end.
 
Has two Tandem cutterheads for longer strip lengths on the leading and trailing ends. Features double-acting clamp cylinders that can grip wire and cable from 0.187 to 0.625". Newly designed clamp jaws provide a better grip on wire and cable, reducing slippage and decreasing damage to insulation.
 
Eubanks Engineering Co., eubanks.com