Tilt 12KN test system reportedly delivers diagnostic precision of in-circuit test. Includes Tilt fixturing technology. Accommodates boards and components ranging from backplanes to micro BGAs. Fixtures are reportedly rugged and maintainable. Includes reusable no-spring pins. Provides built-in dual-level capabilities for combining in-circuit and functional test. Is available equipped with 2500 or 5000 in-circuit test pins in a probe field of 23" x 16".

CheckSum, www.checksum.com
Everett Charles Technologies, www.ectinfo.com

MY200 SMT placement machines feature a linescan vision system and a new high-speed mount head. Vision system combines programmable illumination, image quality and speed. Has automated teaching process and adaptive algorithms. Takes 50,000 images/sec. Hydra 4 placement head has repeatability of less than 30 microns at 3-sigma.

Micronic Mydata, www.micronic-mydata.com

EAPRO newhorizon hot bar soldering series offers pulsed heat and constant heat temperature controllers, low-force and high-force bonding heads, and a fully automatic ACF laminating system. For hot bar reflow soldering and heat-seal bonding applications.

Miyachi Europe, www.miyachieurope.com

JT 5705 boundary scan controllers are for printed circuit board assembly and system testing. Incorporate JTAG/boundary scan controller functions and mixed-signal I/O channels. Provide input protection. Connects to tester via USB interface. JT 5705/USB is a desktop instrument, primarily aimed at hardware validation applications in design, small-scale production test and field service and repair. Features two 15MHz TAPs and 64 I/Os available through 0.1" IDC connectors. Fifty-six of the I/O channels are always digital; 16 also feature a frequency function. The remaining eight channels can be used as digital I/O or analog I/O. Contains a user programmable FPGA. Includes Multi-Sync feature; several JT 5705/USBs can be combined into a single JTAG controller providing multiple TAPs and hundreds of I/Os. JT 5705/RMI is a 1U high 19" rack-mountable instrument for use in systems or as a benchtop tester. Features four 15MHz TAPs and four groups of 64 mixed-signal I/O  channels, providing a total of 256 I/Os available through 0.1" IDC connectors.

JTAG Technologies, www.jtag.com

Vertrel Sion cleaner is for vapor degreasing of electronics and other surfaces. Complies with REACH, F-gas regulations, and other environmental regulations. Is classified as a hydrofluorolefin (HFO) solvent; is nonflammable and ozone-safe. Reportedly does not require acid testing, stabilizer maintenance or solvent monitoring. Does not contain surfactants. Cleans blind vias and flushes underneath BGAs.

DuPont, www.dupont.com

HCT2-120 digital hot air pencil convection rework tool is for applications that use smaller components and integrated circuits. Is handheld, and has a 120W ceramic heater and dual stage air pump. Two LED displays provide graphical and numerical representation of the desired airflow and temperature.  The Digital Hot Air Pencil also includes a pack of six nozzles, work stand with nozzle plate holder, and a nozzle removal pad.

Metcal, www.metcal.com

Factory Intelligence Monitoring Module leverages data available in the TTC platform to calculate and monitor key process indicators over time. Provides information about how well machines and assembly lines are running and causes for non-production and material losses.

Cogiscan Inc., www.cogiscan.com

Spectrum II S2-900 is a high-speed dispensing system for applications in microelectronics and semiconductor manufacturing and MEMS and LED assembly. Is 600mm x 1321mm. Provides up to 30,000 dots per hr. Z-axis performance enables <200µm dots and solder paste line dispensing for MEMS and HDD assembly. Tilt jetting provides up to 30° tilt with most valves. Has automatically adjusting valve positions for workpiece skew and dual simultaneous valves. Includes higher brightness vision lighting and non-contact laser height sensors.

Nordson Asymtek, www.nordsonasymtek.com

MX-500 soldering and rework system is built on SmartHeat technology. Provides controlled heating.  Retains switchable dual port, 40W operation. Features include ground fault interrupt, universal power supply, and compatibility with existing MX-500 products: MX upgrade kits, tip-cartridges and accessories.

Metcal, www.metcal.com

SensorWATCH Basic is a humidity and temperature monitoring system. Provides customer audit protection, delivers 24/7/365 access to factory conditions. Reportedly eliminates manual record keeping. Helps avoid MSD defects and ESD consequences. Includes task-specific instruments that measure and record temperature and humidity. SensorWATCH wireless setup software manages the Wi-Fi instruments and sends data to a designated PC for storing and graphing. Built-in memory in each instrument stores data.

ECD, www.ecd.com

PI series solder paste inspection offers automatic programming, a natural user interface (UI) and an all-in-one solution, including smart embedded tools. Features ultra-large true 3D color image, and 60mms x 330mms field of view.

Vi Technology, www.vitechnology.com

Valor Warehouse Management tool for materials management offers a single environment spanning multiple local and remote warehouses and shop floor storage, from initial material receipt, logistics and storage management. Is said to be easy to use, comprising automated PDA-based material task assignment and advanced configurable logistics rules, including both Kanban and "just-in-time" material delivery protocols. Automated direct gathering of consumption and spoilage data ensures complete and accurate inventory, which avoids unexpected materials shortage and material overstocking. Works in concert with VManage and other Valor tools, as well as SAP, Oracle and other common ERP suites.

Mentor Graphics, www.mentor.com/go/valor-v12