News

The Smart Tweezer is an exciting answer to the old problem of testing and troubleshooting SMD components. With the use of only one hand, the lightweight unit can quickly evaluate all types of SMD components. Can automatically identify and measure inductance, capacitance and resistance.

Has two display modes: primary and secondary. The primary display, located in the middle of the display, is the larger of the two available. It shows the present reading, while a secondary display (on top) shows the present reading of additional parameters or measurement conditions when the primary display shows some other feature (L,C).  When multiple features are present, the secondary display shows one of the values.  

A bar graph located at the bottom of the display that provides an analog indication of the measured input. Can measure DC voltage from 100uV to 800mV, has an oscilloscope-like picture of AC voltage. Designed to measure continuity, has a beeper for resistance reading below threshold, or to indicate a momentary open circuit.

Performs fully automatic auto range measurement for resistance, inductance and capacitance. Most measurement functions also have a manual mode, which can be selected by using the jog dial button. The manual setting is used to measure a specific parameter or when better accuracy is required.

Combines an R-L-C meter in a pair of tweezers. Designed for production line component evaluation, on-board impedance testing and SMD components sorting.

Operates on three 1.5V batteries and comes with a 1 year warranty. 

Excelta Corp.

• Prev
• Next