Products
StripFeeder modular system is for loading tape-and-reel components onto compact modules for prototyping and high-mix, low-volume applications. Now features removable rails that can be mounted to accommodate an array of tape sizes in the same feeder. Can be adjusted by removing the rails and repositioning them on the base plate at desired width (4mm pitched hole pattern). Rails align with precision pin locaters and lock down with magnets. Hold components securely in machined tracks. Can remove rails to accommodate larger components up to 120mm tape width. Is built to JEDEC-standards and size specifications.
Count On Tools, www.cotinc.com
NexJet system jetting technology contains Genius jet cartridge, a one-piece jet removable without tools. Has built-in memory to store usage data such as number of cycles and cartridge type. Includes software control of jetting process; accommodates both low- and high-viscosity fluids and a range of fluids for applications such as flip chip underfill, chip-scale package, ball grid array, package-on-package underfill, precise coating, and adhesive dispensing. Cartridge dispenses up to 50 million cycles before replacement is necessary, depending on application. Memory stores usage data that is communicated to dispenser; notifies operator when correct cartridge is installed or needs replacement.
Nordson Asymtek, www.nordsonasymtek.com
No. 959 is a 300ºF electrically-heated vertical conveyor oven used for curing electronic parts. Dimensions measure 36" x 89" x 115". Uses a 40KW heating element and a 6000 CFM, 5-HP recirculating blower. Features 4" insulated walls, aluminized steel interior and exterior, motor-operated vertical lift door at the loading/unloading opening and two independent doors. Includes 27 product carrier trays, each 30" x 14", supported at each side by a roller chain, driven by a ½-HP drive motor, controlled by a variable frequency drive. Controls include a digital temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch, and a tower light to indicate machine status. Built to JIC/NEMA 12 standards.
The Grieve Corp., www.grievecorp.com
Press Releases
- New Senate Bill Supports Reshoring and Restoring U.S. Printed Circuit Board Manufacturing
- Semi-Kinetics Brings on Colin Forgy to Lead Manufacturing at Idaho Facility
- Absolute EMS Expands Advanced Assembly Capabilities with SASinno Americas PF-6T High-Precision Connector Press-Fit System
- VJ Electronix Partners with The Murray Percival Company to Expand Support Across the Midwest