Circuits Assembly Online Magazine - Current Issue

Products

StikNPeel single-use flexible rework stencil is adhesive-backed. Tacky adhesive makes sure the stencil stays coplanar to the board during paste printing; solder does not smear underneath the stencil. Can be placed in crowded areas of the PCB without relying on tape down or fixturing methods. Made from Mylar and available in 0.004", 0.005" and 0.006" thicknesses. QFPs and other devices and areas down to 0.5 mm pitch can be fabricated. Each stencil is cut to order from customer datasheets, Gerbers or dxf/dwg files. Max. stencil size is 4" x 4". Twenty pieces per package.

BEST, www.solder.net

MXG-2500REZ lens has a wide zoom range and triple objective turret. Provides macro to micro views. Lens parfocality permits sustained focus from 35x to 2500x. Turning the turret permits access to each objective lens and an optical zoom range of more than 70x the min. magnification. Features integrated auto calibration select that recognizes the objective lens’ positioning and zoom level. Calibration information displayed and stored. Includes dual illumination mechanism that provides co-axial and ring lighting.

Hirox, www.hirox-usa.com
Seika USA, www.seikausa.com

No. 955 is a 500ºF electrically-heated, top-loading oven. Workspace measures 312" x 24" x 24". Four 2 HP recirculating blowers provide horizontal rear-to-front airflow. Has 4" insulated walls, aluminized steel exterior and interior, a motor-operated rear-hinged door opening the top and front, and a workspace floor reinforced for 7200 lbs. loading onto the 1/4" steel plate surface. Features digital programming temperature controller with two channels; two independent zones of temperature control; two manual reset excess temperature controllers with separate contactors; four recirculating blower airflow safety switches.

The Grieve Corp., www.grievecorp.com