Circuits Assembly Online Magazine - Current Issue

Products

CAM350 XL is a unified suite of tools for complete PCB post-processing. Combines CAM350 and BluePrint-PCB technologies. Focuses on design and Gerber verification for manufacturing; tooling aid output generation, including Gerber, ODB++, solder and paste masks, and NC drill and mill; PCB documentation; release package creation and distribution, and ECO automation. Supports these functions for single PCBs and panels. Offers multi-level verification. Is said to support all major industry output standards required to translate a finished PCB design into accurate Gerber, ODB++, and NC information. Creates complex fabrication, assembly, panel and other drawings to front-end manufacturing without the need to re-extract, convert or re-import data. Exports Gerber and NC drill and mill data directly to the same release package database file the PCB documentation was created in. Revisions can be compared graphically to determine differences between two design database revisions. Report file can be cross-probed to the original CAD system.

DownStream Technologies, www.downstreamtech.com

EconoGen is a compact plug-and-play nitrogen generator that reportedly eliminates reliance on outside sources for cylinders. Consists of two filter beds of carbon molecular sieve. While preheated compressed air enters the bottom of the first bed and passes across the sieve, oxygen and trace gases are absorbed as nitrogen is allowed to pass through to enter a low-pressure storage tank. As one bed becomes saturated, the second bed automatically activates and takes over the separation process. Remains operative until N2 production requirements are met or the storage tank is filled. Is offered in two series, with Series 1 systems used in low- to high-volume applications, while Series 2 generators are for laboratory, prototyping or benchtop applications.

Manncorp, www.manncorp.com/nitrogen-generators/

The SE500 series 100% 3-D solder paste inspection system reportedly has the ability to inspect assemblies at greater than 70 to 80 cm2 /sec. speeds. Inspect pad sizes down to 01005 (150 x 150 µm). Comes in two models, to accommodate different panel sizes. Features a conveyor that can transport panels from 50 x 50 mm to 510 x 510 mm. SE500X can transport panels from 100 x 100 mm to 810 x 610 mm. Standard features for both models include automatic conveyor width adjustment, mechanical board stop, 1- and 2-D multiple barcode read using the sensor, and process tracker SPC charts with alarm capability in the operator user interface. Has enhanced warp compensation for flexible circuits, the ability to handle odd-shaped pads, and an XML file format output. Can run program files originally created for SE 300 Ultra.

CyberOptics Corporation, www.cyberoptics.com