Circuits Assembly Online Magazine - Current Issue

Products

Friendly Green presaturated wipes are low linting and designed to remove all solder pastes, resins, water-soluble, no-clean, leaded and Pb-free from stencils, screens, misprints and other surfaces. Are said to be effective in cutting through tough, dried solder paste and flux residue. Do not harm stencil construction materials (aluminum frame, stainless steel or polyester screen and stainless steel, brass or nickel metal etched foil). Are saturated with low-toxicity compounds, contain no solvents, and are biodegradable. Meet or exceed current and reasonably anticipated VOC requirements (EPA, AQMD, SCAQMD).

High-Tech Conversions, www.high-techconversions.com

The Flexys-10 intelligent placement system is for low- to medium-volume high-mix production and NPI requirements. Rated at 10,000 cph (IPC-9850: 8,600 cph). Comes with eight new turret positions, an eight-position rotary head with on-the-fly vision. Feeder capacity of 128 x 8 mm tapes and 10 matrix tray locations. Places 0201 to 2.75" sq QFP/BGA. Has a reported accuracy of 0.0014" for QFP/BGA and 0.0035" for chips at 3-Sigma. Accommodates tape, stick or tray feeder types. Options include standalone or in-line conveyors, intelligent belt feeders, barcode reader, glue dispenser, fixed upward vision camera, component test verification and more.

Europlacer, www.europlacer.com

The EL thermal imaging system includes a new camera with a 320 x 240 uncooled detector array with <0.05ËšC sensitivity and 16-bit digital camera link interface. Said to capture and display images at a rate of 30 frames/sec. and provide a resolution of 70 µm.

For use in locating shorts, stressed components and other defects, and analyzing thermal behavior of individual components. Model Board Comparison locates defects by comparing thermal behavior of defective boards to a known good board model.

OptoTherm, Inc., www.optotherm.com