Products
BasicLine and AdvancedLine AOI software now reportedly provide faster 360° inspection of components and solder joints. Enable higher fault detection. New optimization algorithms reportedly cut test procedure times up to 40% using multiple angled-view inspections from different directions. Angled-view module offers a large field of view with image quality at a viewing angle of 45°. Angled-view inspection with a rotation step size of 1° evaluates hidden solder joints. Software update available for installed systems.
Goepel electronic, www.goepel.com
Cion-LX Module/FXT48A boundary scan module for testing analog, digital and mixed signals reportedly extends boundary scan technology to non-scanable partitions. Has 48 single-ended and six differential channels with a voltage range between 0.9V and 3.6V. Dynamic test resources such as frequency counter, event detector, arbitrary waveform generator or digitizer are available for each channel. Both static and dynamic at-speed tests are possible. Is based on ASIC Cion-LX JTAG controllable mixed signal tester-on-chip.
Goepel electronic, www.goepel.com
E4990A impedance analyzer now has an enhanced measurement speed option. Low-frequency models now reportedly as fast as 120MHz E4990A model. Can use the option with the 10MHz (Opt. 010), 20MHz (Opt. 020), 30MHz (Opt. 030) or 50MHz (Opt. 050) low-frequency options. Reportedly increases measurement speed up to 10x. Analyzer has a frequency range of 20Hz to 10/20/30/50/120MHz and provides 0.045% basic accuracy, with a 40V built-in DC bias source. Equivalent circuit analysis function supports seven different multi-parameter models and enables simulation of equivalent component parameter values.
Keysight Technologies, www.keysight.com
LAS 160 extraction and filtration system features a new filter combination said to significantly increase filtration efficiency. Also has low-noise system operation. Can be equipped with suitable capturing elements, such as hoods or extraction arms, or connected to external systems for automated operation via a D-Sub interface. Removes airborne substances occurring during material processing and marking by means of laser technology.
ULT AG, www.ult.de
Zestron Eye CM full scale concentration management or short CM system provides precise, real-time concentration measurement of the cleaning stage based on Zestron Eye 3P-Technology, as well as closed-loop dosage of cleaning agent concentrate or DI-water. Constantly monitors media concentration and maintains defined concentration level for continuous good cleaning results. Designed as a standalone module, can be integrated within production lines and connected to newly implemented or existing cleaning processes independently of the machine type and manufacturer. 
Zestron, zestron.com
Flexcon SA1000 offers clean removability, performance at temperatures as high as 400°F, and clarity. Can be used to affix films to smooth surfaces and provides consistent, clean, quiet removability. Can be reapplied or used more than one time in some cases. Comes in two VBS product constructions, a 2 mil and a 5 mil clear polyester with a polyester liner for excellent adhesive wet-out.
Flexcon, https://www.flexcon.com
