Circuits Assembly Online Magazine - Current

Products

The Fluid Dispenser Pen with nylon brush tip consists of a lightweight polypropylene cartridge and is said to have a capacity of 7cc. The tip reportedly allows users to reach minute areas accurately. Designed to provide the user with ultimate control over the amount of fluid being dispensed. Especially designed to minimize waste; prevents leakage.

QTEK, www.qtek.com

Menda’s new green 6 oz. dissipation one-touch dispensing bottles and 8 oz. dissipative wash bottles promote ESD and lead-free awareness. Made of dissipative LDPE E9 Durastatic by Vermason. RTG is 10e9. No migratory additives. Contamination from the bottles is said to be greatly reduced. Provide controlled delivery of solvents, cleaners, water and oils. The wash bottle has an angled non-drip spout to deliver a single drop or a fine stream.

Menda, www.mendapump.com

FireWire high flex round and flat cable assemblies are said to provide motion control and vision systems with reliable flex life performance. Reportedly maintain stable attenuation over the flex life. Designed to meet the demands associated with motion control and vision systems. Will flex with no bit errors or loss of data.

Round cable assemblies have been tested to achieve 5 million cycles in rolling flex motions on bend radius of 50 mm. Flat cable assemblies have been tested to achieve 20 million cycles in rolling flex motions on bend radius of 20 mm. Come in two, three, 4.5 and 7.7 m, or custom sizes.

W. L. Gore & Associates, www.gore.com

Three new lens colors for protective eyewear are available: dark gray and SCT gray (for outdoor glare) and amber (for low light). Meet ANSI and OSHA requirements and are CSA-certified. Designed for comfort all day, the eyewear features anti-fog, scratch-resistant, anti-UV lens coatings. Wraparound polycarbonate lenses for clear peripheral vision and eye protection. Adjustable temple lengths and soft, flexible nose-piece.

Klein Tools, www.kleintools.com

Samsung’s RF30 series reflow soldering systems has been added to the SP450V screen printer, SM and CP Series component placement systems, and associated board handling systems, to provide a full turnkey line.

Features include a Windows-based operator interface, a multifunctional heating system. Double-covered insulated heating zone construction is said to feature multi-ejection nozzles and fans circulating air in five directions. Dual-active cooling zones with variable speed fans reportedly bring the board temperature below the liquid state at a controlled rate. Available in 8, 10 and 12 heated zones, plus two cooling-zone configurations.

Dynatech Technology, www.dynatechsmt.com

PCB Raptor features a pressure-foot brush assembly for depanelizing PCBs. Mills, drills, routes and engraves at feeds up to a reported 600" per minute. Designed the rapid in-house PCB routing. The 60,000-rpm spindle is said to mill precision geometries required by high frequency and microwave applications. Can machine most electronics materials, including G10, FR-4, EMI-proof aluminum, copper, stainless steel, gold, Delrin, Torlon, Delmat, Kapton, Lexan and many other plastics and metals. The use of low-pitch precision ball screws on the EX model reportedly results in a resolution of ± 0.00008", an absolute accuracy of ± 0.0005", and a relative accuracy of ± 0.0002".

Datron, www.datrondynamics.com