Products
Automated conformal coating production line will begin coating the bottom-side (wire side) with a Prism 100 (designed for high-speed coating). The board will then pass through a board inverter to a Prism 350 to be selectively coated on the component side.
Prism Coating Systems are designed for precise application of conformal coatings and other low-viscosity materials. Feature Ultra-Spray technology, said to enable a more accurate, precise coating application than conventional spray and dispensing technology.
Uses a titanium coating head and digitally controlled liquid delivery system. The coating head applies a thin, defect free coating 1 to 5 mils in thickness and reportedly provides uniformity and repeatability.
Ultrasonic Systems Inc., ultraspray.com
Booth 735
Prism Coating Systems are designed for precise application of conformal coatings and other low-viscosity materials. Feature Ultra-Spray technology, said to enable a more accurate, precise coating application than conventional spray and dispensing technology.
Uses a titanium coating head and digitally controlled liquid delivery system. The coating head applies a thin, defect free coating 1 to 5 mils in thickness and reportedly provides uniformity and repeatability.
Ultrasonic Systems Inc., ultraspray.com
Booth 735
9600 Series Vibration Isolation Workstation for use in cleanrooms is constructed of stainless steel using cylindrical welded braces for maximum rigidity, minimum flat surfaces and easy wipedown.
An enclosed isolation module, stainless steel valves and vented exhaust maintain compliance with Class 1 and 10 cleanroom standards. Available with electropolish finish (Class 1) or clear passivate finish (Class 10).
Features low natural frequencies and high isolation efficiencies. Under maximum load at 80 psi and 10 Hz, typical vibration isolation efficiencies are 93% with a vertical natural frequency of 1.5 Hz and 95% with a horizontal natural frequency of 1.6 Hz. Has isolated weight capacity of either 800 or 1300 lbs.
Feature the proprietary Active-Air Suspension system ¾ a dual-chamber compressed-air system for vibration damping and a preset “zero deflection” level to compensate for load changes.
Tables are available up to 36” deep and 60” wide. Accessories include guard rails, fixed or sliding shelves, and monitor supports.
Kinetic Systems, kineticsystems.com
An enclosed isolation module, stainless steel valves and vented exhaust maintain compliance with Class 1 and 10 cleanroom standards. Available with electropolish finish (Class 1) or clear passivate finish (Class 10).
Features low natural frequencies and high isolation efficiencies. Under maximum load at 80 psi and 10 Hz, typical vibration isolation efficiencies are 93% with a vertical natural frequency of 1.5 Hz and 95% with a horizontal natural frequency of 1.6 Hz. Has isolated weight capacity of either 800 or 1300 lbs.
Feature the proprietary Active-Air Suspension system ¾ a dual-chamber compressed-air system for vibration damping and a preset “zero deflection” level to compensate for load changes.
Tables are available up to 36” deep and 60” wide. Accessories include guard rails, fixed or sliding shelves, and monitor supports.
Kinetic Systems, kineticsystems.com
The portable USC 400 ultrasonic cleaning system can be taken directly to the stencil printer to clean stencil apertures without the need to reset and calibrate the printer. When the system is offline, it can be used in conjunction with a bench-mounted or stand-alone stencil cleaner.
Features Direct On-Contact Ultrasonic Cleaning to remove Pb-free solder paste particles trapped within stencil apertures.
Benefits include: minimal use of fluids, total aperture penetration, no risk of stencil damage and robust construction. Can be used with solder paste or SMD adhesives, is suitable for stainless and plastic stencils. Cleans pick-and-place nozzles, dispensing needles and probe test pins, and can soften solder paste.
An ultrasonic cup with a dwell timer is optional.
Features Direct On-Contact Ultrasonic Cleaning to remove Pb-free solder paste particles trapped within stencil apertures.
Benefits include: minimal use of fluids, total aperture penetration, no risk of stencil damage and robust construction. Can be used with solder paste or SMD adhesives, is suitable for stainless and plastic stencils. Cleans pick-and-place nozzles, dispensing needles and probe test pins, and can soften solder paste.
An ultrasonic cup with a dwell timer is optional.
Surface Mount Technology (SMT), info@smt.uk.com
PowerMod HP (high power) “B” series connector family features touch-safe female housings, integral positive latches and cable strain relief.
Rated over 350 amps and to 250 amps at a 30º C temperature rise. Accommodates American wire sizes from 1/0 to 4/0 AWG and metric wires from 50 to 95mm². Use Sterling contact technology to offer low electrical resistance. Provides a minimum of 500 mating cycles and is rated for circuit interruption (true hot-plug).
Latching system with distinct blue buttons for clear identification offers security and ergonomics. IP 20 rated (touch safe) for user safety, integral coding key allows unique mating of up to 6 individual connectors. Cable strain relief kit, for all applicable wire sizes, is an option.
Offered in 10 different connector housing types, including right angle, bus bar, panel mount and blindmate/float selections.
Anderson Power Products, andersonpower.com
Rated over 350 amps and to 250 amps at a 30º C temperature rise. Accommodates American wire sizes from 1/0 to 4/0 AWG and metric wires from 50 to 95mm². Use Sterling contact technology to offer low electrical resistance. Provides a minimum of 500 mating cycles and is rated for circuit interruption (true hot-plug).
Latching system with distinct blue buttons for clear identification offers security and ergonomics. IP 20 rated (touch safe) for user safety, integral coding key allows unique mating of up to 6 individual connectors. Cable strain relief kit, for all applicable wire sizes, is an option.
Offered in 10 different connector housing types, including right angle, bus bar, panel mount and blindmate/float selections.
Anderson Power Products, andersonpower.com
Agile 9.2, the latest release for managing the enterprise product record throughout the product lifecycle, features enhanced functionality and expands on compliance, product portfolio, product collaboration and quality management modules. Supports Linux operating systems, for flexibility, improved intellectual property security and reduced cost of ownership.
Product Governance and Compliance—Provides expanded capabilities to manage Bill of Substance information and rollup compliance information using a variety of scenarios. Has improved supplier declaration capability and regulatory information for effective compliance. Includes upgraded Bill of Substance adapters for Agile partners - PartMiner, i2 technologies, Avent and Arrow.
Product Portfolio Management— Includes executive portfolio analytics and bi-directional integration with Microsoft Project, to provide tightly synchronized program and product information, maximized resource utilization and cross-program visibility and decision support. Portfolio analytics include time to market, financial, resources pool, program and issues tracking.
Product Collaboration—Has enhanced change collaboration and document management capabilities, providing each stakeholder in the extended design and supply chain secure access to critical product record data, including bills of material, attributes, manufacturers, configurations, specifications, documents, models, work instructions, revisions and more.
Improved Global Interface—PLM portfolio is completely localized in six different languages: English, French, German, Japanese, traditional Chinese and simplified Chinese.
Product Quality Management— (previously called the Product Service and Improvement solution) Includes advanced analytics capabilities to tightly integrate customer, product, quality and regulatory information within a closed-loop corrective action system. Enables companies to fulfill customer demands for higher quality, faster response and compliance with regulatory requirements.
Linux Support –Adds the Linux open source operating system to its supported environments. Supports Red Hat Linux AS version 4.0.
Agile Software Corp., agile.com
Product Governance and Compliance—Provides expanded capabilities to manage Bill of Substance information and rollup compliance information using a variety of scenarios. Has improved supplier declaration capability and regulatory information for effective compliance. Includes upgraded Bill of Substance adapters for Agile partners - PartMiner, i2 technologies, Avent and Arrow.
Product Portfolio Management— Includes executive portfolio analytics and bi-directional integration with Microsoft Project, to provide tightly synchronized program and product information, maximized resource utilization and cross-program visibility and decision support. Portfolio analytics include time to market, financial, resources pool, program and issues tracking.
Product Collaboration—Has enhanced change collaboration and document management capabilities, providing each stakeholder in the extended design and supply chain secure access to critical product record data, including bills of material, attributes, manufacturers, configurations, specifications, documents, models, work instructions, revisions and more.
Improved Global Interface—PLM portfolio is completely localized in six different languages: English, French, German, Japanese, traditional Chinese and simplified Chinese.
Product Quality Management— (previously called the Product Service and Improvement solution) Includes advanced analytics capabilities to tightly integrate customer, product, quality and regulatory information within a closed-loop corrective action system. Enables companies to fulfill customer demands for higher quality, faster response and compliance with regulatory requirements.
Linux Support –Adds the Linux open source operating system to its supported environments. Supports Red Hat Linux AS version 4.0.
Agile Software Corp., agile.com
‘Soft Landing’ technology on the Condor flying probe test platform addresses concerns manufacturers face over test coverage on complex and high density boards, as well as unwanted damage that can occur with conventional probe techniques.
With ‘Soft Landing,’ the test nail travels towards the component or pad at normal speed until approximately 1 to 2 mm above its target landing position. The speed of the nail is then reduced to soften its impact with the board. This protects delicate components and minimizes the ‘footprint’ where the nail touches the board. In tests, adding a soft landing to an existing nail contact reduced the visible ‘footprint’ by more than a third.
A smaller footprint means more precise positioning in highly dense areas. It also lowers the chance of shorting leads in close proximity to each other, invalidating the test and creating potential damage.
Test coverage increases as more test points can be reached without being damaged or scratched. It only affects the z-axis of travel; Digitaltest MTS system test programs can be updated to take advantage of the technique with minimal additional programming.
Digitaltest GmbH, digitaltest.com
With ‘Soft Landing,’ the test nail travels towards the component or pad at normal speed until approximately 1 to 2 mm above its target landing position. The speed of the nail is then reduced to soften its impact with the board. This protects delicate components and minimizes the ‘footprint’ where the nail touches the board. In tests, adding a soft landing to an existing nail contact reduced the visible ‘footprint’ by more than a third.
A smaller footprint means more precise positioning in highly dense areas. It also lowers the chance of shorting leads in close proximity to each other, invalidating the test and creating potential damage.
Test coverage increases as more test points can be reached without being damaged or scratched. It only affects the z-axis of travel; Digitaltest MTS system test programs can be updated to take advantage of the technique with minimal additional programming.
Digitaltest GmbH, digitaltest.com
Press Releases
- Kitron Signs Multi-Year Agreement for Advanced Sensor Manufacturing in Europe; Kristoffer Asklöv Comments
- Scanfil Boosts Investment in Electronics Manufacturing in the US; Christophe Sut Comments
- NEOTech CEO Emphasizes Workforce Investment and Nearshoring Strategy for 2025
- Cybord’s Visual AI Solution to Be Integrated with Siemens’ Opcenter MES; Markus Sauter and Oshri Cohen Comment