VersaFlex-Ultra selective solder module features two solder pots, either y- and x-variable or z-variable, equipped with different solder and different solder nozzles.
X7056-II inline automatic 3D X-ray inspection machine features a new handling concept called xFastFlow for printed circuit boards change in as few as 4 sec.
E-Z Step stepped stencils are used to facilitate an increase or decrease of paste volume and deposit height on selected printed circuit board areas with mixed component technology, large ground pads, intrusive reflow or coplanarity issues. Step areas are 20 to 150µm with support of complex shapes. Step ramp is in 50µm increments. Positional accuracy is <10µm on step areas. Material thickness is +/-2%.
MET Stencil
www.metstencil.com
BSX series BERTScope is 32Gb/s protocol-aware bit error rate test and analysis system. Helps characterize receiver in Gen3 and Gen4 devices. Can shorten time needed to debug link training and bit error rate issues. Provides tools and flexibility to visualize and control handshaking and link training process for devices. Is available with maximum data rates of 12.5Gb/s, 24Gb/s and 32Gb/s. Includes tools that automate compliance testing. Has built-in Tx equalization, reference clock multiplication, and interference generation.
Tektronix
www.tek.com
The accessory kit for Jumbo Elephant extraction and ionization unit includes test and measurement devices, as well as cleaning tools. Ion Check Set includes a functional tester for ionization systems (ion check) and a measuring probe for high-voltage power supply check (ion check test probe). Also has field intensity meter for measuring electrostatic charges on material surfaces (ELFI I) and a cleaning kit, consisting of 0.5l cleaning agent and a brush.
ULT
www.ult.de
EP30TC is a two-component epoxy that contains a thermally conductive filler with very fine particle sizes. Is a NASA low outgassing certified system that can be used for bonding, coating, sealing and encapsulating. Exhibits a thermal conductivity of 18-20 BTU•in/ft2•hr•°F [2.60-2.88 W/(m•K)] and has the ability to be applied in sections as thin as 5-15µm, resulting in a low thermal resistance of 7-10 x 10-6 K•m2/W. Is a reliable electrical insulator and has a volume resistivity of over 1014 ohm-cm. Is serviceable over temperature range of -100°F to +300°F. Has tensile strength of 5,000-6,000 psi, compressive strength of 24,000-26,000 psi and tensile modulus of 500,000-550,000 psi.
Master Bond
masterbond.com
Press Releases
- Austin American Technology Reports Strong Growth in Mexico
- GEN3 Announces Exclusive UK Distribution Partnership with RAS for HATS2 Test System
- Yamaha Robotics Brings Inspection Innovations for Growing Markets to electronica 2024
- Zero Defects International to Exhibit at Silicon Valley Expo and Tech Forum