KFS-VAF volumetric atomized flux applicator is for selective soldering. Controls and dispenses atomized flux material on demand via a user-programmable control system. Does not require any mechanical adjustments. Spray volume and width is set by user-programmed control parameters; varying amounts of coverage can be accomplished as needed on the same printed circuit board. Can be used with all known fluxes, even up to 33% solids. Can be integrated with the KFSDJ drop jet fluxer.
ACE Production Technologies Inc., www.ace-protech.com
SolderStar Pro - VP is for vapor phase reflow profiling. Permits measurement in both standard vapor phase chambers and vacuum applications. Has an ultra-low mass data logger and thermal shield combination. Has minimal influence on the process measurement.
SolderStar Ltd., www.solderstar.eu
SpotCheck handheld counter provides fast estimates of parts quantities without removing tape from the pick-and-place feeders. No time is lost threading leader tape and loading the reel. Is self-contained and requires no attachments. Produces SMD tallies in less than 60 sec. without interrupting production. Has pre-kitting functionality. Accuracy range is ±5%.
Manncorp, www.manncorp.com
SE500-D dual lane SPI system is designed with large board handling capability. Has a flexible conveyor configuration; permits different products with varying board widths to be run on the same line. Supports asynchronous inspection on separate lanes. Has calibration-free sensing; inspects assemblies at 80 cm²/sec. speeds or greater.
CyberOptics Corp., www.cyberoptics.com
Hysol PC40-UMF is a solvent-free conformal coating material. Is a stable one-part material with a shelf life of six months. Is UV curable in 30 sec. with a built-in secondary moisture cure mechanism. Offers superior wetting and wicking performance; its rheology has been optimized for the latest dispensing technologies. Dispense capability enables material to be more easily applied on selected areas. Has excellent fluorescence under black light.
Henkel, www.henkel.com/electronics
FX-3R high-speed modular mounter has higher production capacity than FX-3: 90,000 CPH (0.040 sec./chip under optimal conditions). Is equipped with linear servomotors in the X and Y axes to drive the heads. The weight of the head has been reduced; the head design has a more rigid structure. Supports large boards up to 610 mm x 560 mm (XL board specification) as a standard feature; offers an optional feature to produce a long board up to 800 mm wide, mainly used for LED lighting. Includes hybrid tape feeder feature; accepts both electric and mechanical tape feeders in one machine.
Juki, www.jukiamericas.com
Press Releases
- OKI Develops Ultracompact Photonic Integrated Circuit Chip Using Silicon Photonics Technology to Realize Various Optical Sensors
- AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Silicon Valley Expo & Tech Forum
- Occam Strengthens Leadership Team with Addition of PCB Expert Dana Korf
- ITW EAE Expands Partnership with Etek Europe to Represent Despatch Products in the UK and Ireland.