Fluid Dispenser Pen increases precision in fluid dispensing and eliminates the mess associated with dispensing bottles. The chisel point, spring-loaded tip allows users to determine the amount of liquid to be dispensed, thus reducing waste and chemical exposure.
 
While primarily used for flux dispensing, can also be used to dispense solvents, lubricants, masking, RMA chemistries, adhesives and water-based liquids. Prevents evaporation of material and conforms to current regulations for controlling substances capable of evaporation hazard. A dispensing valve prevents flooding and spattering, and releases liquid in controlled amounts to the nib.
 
The two parts (cap and reservoir) are easily assembled. The reservoir should be filled with material to within 19 mm (0.75”) of the top; this air chamber allows for the valve cap to be pressed securely in position. Priming is achieved by depressing the nib while the pen is vertical.
 
Can be used for rework and touch up soldering, as well asdistribution of solvents, lubricants, masking, RMA chemistries, adhesives and water-based liquids.
 
Fluid Dispenser with Brush Tip consists of a polypropylene cartridge with a fine nylon brush tip, and has a capacity of 7 cc. The fine brush tip allows users to reach small areas with increased accuracy.  The transparent cartridge allows the user to view the level of remaining material, and as applying light pressure to either side of the barrel dispenses the fluid, the user has complete control over the amount of fluid being dispensed. 

QTEK, qtek.com