Circuits Assembly Online Magazine - New Products

New Products

The 180 x 50 cm automatic, inline printing system is for LED tubular lamps that will replace fluorescent lamps. The line consists of a large-format printing system, multiple pick-and-place machines, and a curing or reflow system. Can produce all lengths of LED tube lamps up to 180 cm. Inline screen/stencil printer permits a panel for multiple 180 cm tubes to be printed in one run. Automatically loads and prints PCBs and forwards them to the pick-and-place system. Conveyor system is designed to transport heavy aluminium-based PCBs commonly used for LED products. One or more pick-and-place machines are installed inline to mount LEDs and other electronic components onto the PCB. MIS software automatically balances the work load over multiple machines. A high-performance reflow or curing system is installed inline. Line can be customized.

Essemtec, www.essemled.com

Juki SMT tooling nozzles include 500 and 800 series nozzles in both base designs (gold/silver). Enable accurate chip placement. Are available in standard nozzles (Type 500-508) and custom designs (Type 510-558; 800-803 Grippers). Special nozzle designs for odd-form components, such as LEDs, switches, and connectors. Guaranteed to function properly with KE2010, KE2020, KE2030, KE2040 (gold nozzles), KE2050, KE2060, KE2070, KE2080, KE3020, KE1070, KE1080, FX-1, FX-2, FX-3, JX-100 and JX-100LED (silver nozzles).

Count On Tools Inc., www.cotinc.com

Process Monitor statistical process control software enables production management. Includes comprehensive statistical process control charts that measure process capability. Built-in, real-time monitoring tools enable SPC capabilities on the inspection system in existing production lines. Preconfigured functions permit quick access to information. Enables in-depth data analysis to identify trends and enhance line yields. Is designed for quick installation and easy operation.

CyberOptics, www.cyberoptics.com

Model 4800 is part of the 8th Generation automated device programmer line. Programs up to 36 devices in parallel at a rate of up to 1,500 devices per hr. Offers universal device support, capable of programming microcontrollers, NAND flash, NOR flash, Serial flash, Managed NAND flash, E/EPROM, flash EPROM and other technologies with densities up to an 8 Eb theoretical limit. Supports devices with voltage down to 0.7 (Vdd). Includes Vector Engine Co-Processor; accelerates waveforms during programming cycle. Has LaserAlign sensor. Is ideal for high-volume production; can use 1 to 36 socket cards and is compatible with Flashstream socket cards.

BPM Microsystems, www.bpmmicro.com

BR720 Pb-free rework station desolders, removes and replaces BGAs, QFPs and other fine-pitch devices. Uses split-vision zoom optics with 22x magnification. Real-time images of components superimposed on solder pads are continuously displayed on monitor. Make final X and Y micrometer adjustments with LED lighting providing high-image contrast for alignment. Controlled heat, from hot air top and bottom, is capable of Pb-free temperatures up to 350ºC. IR underheater said to prevent board warpage. Uses onboard independent K-type thermocouple port. Placement head with automatic Z axis removes, places and solders components without intervention. Includes a built-in vacuum generator. Accommodates boards to 550 x 500 mm.

Manncorp, www.manncorp.com

Pantera-XV SMD placement machine is designed for prototype and mid-size series manufacturing. Meets standards of a high-mix/low-volume production. Application range is large. Is capable of placing 4,500 components per hr. Features optical laser and vision centering. Can place all SMD components from 0201 up to 50 mm x 50 mm. Has large feeder capacity and automatic identification of intelligent feeders. All tape feeders are electrically driven. Feeding pitch is programmable.

Essemtec, www.essemtec.com