Keysight Technologies' i3070 Series 7i in-line test system is an automated in-circuit test system that offers increased capacity and throughput to meet the complex test demands of larger node count PCBAs.
Emil Otto Flux Gel EO-B-010 is based on the same activator and the same active ingredient as the comparable, alcohol-based electronic flux EO-B-010 and its variants EO-B-010 A-C and X. EO-B-013, for example, is manufactured with the electronic flux EO-B-013 and its variants EO-B-013/X and XS. PM-334 uses flux PM-334 and the variants PM/EA-334, PM/EA-2234, and RS-4004 with flux RS-4004. All gels are highly concentrated and are characterized by high activity as well as good wetting and spreading. EO-Y-014 is based on the alcohol-water-based hybrid flux EO-Y-014 as well as variants EO-Y-014 A-C.
All are no-clean, and achieve quality soldering results and reliably activate contaminated pads and component pins. No crystals are formed, and the gels remain homogeneous and stable throughout processing. Leave no sticky residues on the assembly. Can be is applied from a metering syringe using metal needles, and processed with a hot air or soldering iron.
Emil Otto
Sayaka CT34XJ router offers a host of features that significantly enhance the PCB routing process.
Europlacer's ii-P7 printer introduces a range of productivity enhancements that include a maintenance-free printhead offering active closed-loop squeegee pressure and zero squeegee calibration.
Master Bond's MasterSil 711Med is a one part, flowable, room temperature vulcanizing silicone that needs no mixing and can be used for bonding, sealing, coating and form-in-place gasketing applications.
ITW EAE's Edison II ACT stencil printer is integrated with automated changeover technology that is fast and consistent with reduced operator requirement resulting in error-free changeover, and increased yield and throughput.
Vishay Intertechnology's STH series capacitors are wet tantalum capacitors with hermetic glass-to-metal seals.
ViTrox's V9i ARV XL features a six-axis COBOT design to enable adjustable angle inspections up to 90° and accommodates PCB dimensions of up to 840mm x 620mm
Mycronic's MYPro A40 pick-and-place platform increases top placement speeds by 48% while handling a significantly wider range of component types and sizes.