Products
The GT2 Series contact digital sensor has a scale-shot system said to provide 0.1 μm resolution and 1.0 μm accuracy. Reportedly loses no data due to rapid spindle movement during production line and other high-speed applications. All measurement is performed in the compact GT amplifier requiring no PLC or external data processing. Are tough and rugged, and cable has IP67 water-resistant enclosure rating. Sensor head cable uses a flexible robot cable that can withstand continuous bending up to 6 million times at a radius of 50 mm, and can be cut anywhere to length. Linear ball bearings are covered by a strong rubber, and encase the spindle to ensure a service life by eliminating wear and abrasion damage. Detecting durability extends up to 20 million times.
Keyence Corp. of America, www.keyence.com/GT2
RF741 No-Clean Gel Flux, for electronics component rework and repair applications, is high viscosity and has a gel-like consistency. Is said to be easily applied by syringe dispensing. Stays in place until soldering. Is compatible with most no-clean chemistries and leaves solder joints bright and shiny after reflow. Is classified as ROL0 per J-STD-004 and Bellcore GR-78 compliant.
Easy Spheres, www.easyspheres.com
DSP 866 no-clean, Pb-free solder paste reportedly has 0% ppm total halogens and comes in a variety of alloys. Has flux classification of ROL0 per J-STD-004. Exhibits excellent printing characteristics and will perform during continuous printing for up to 8 hr. Abandon time of at least 1 hr. said to be is possible. Characterized by brick-like prints. Good release seen on 0.0012 to 0.0009 apertures with print speeds in the range of 1" to 6" per sec. Has nonconductive, noncorrosive and highly insulated residues. Nitrogen not required.
Qualitek International, www.qualitek.com
Press Releases
- Koh Young Webinar to Show How Data Transparency Strengthens SMT Production Resilience
- Aven Welcomes Max Ramos to Strengthen Distribution Partner Operations
- ubersmt Expands SMT Line with Juki G-Titan Printer and RS-1R Placement System
- Keiron Technologies to Host LiFT Webinar Focusing on Solving Solder Paste Printing Challenges