Products
Eunil H.A. Americas has added the PARMI SPI 3-D paste inspection system to its product line.
The in-line solder paste inspection system reportedly provides reliable, accurate, 100% inspection at high speeds. Inspects numerous kinds of solder paste defects after screen printing by measuring height, area and volume in conjunction with the system’s fast and accurate 3-D data.
Can detect printing faults (volume, height, area, registration, bridge) and monitor the printing process, which helps the operator find the printing status quickly on the line. Uses SPC, providing printing process monitoring and control both on- and off-line.
Increases first pass yield by preventing faulty PCBs from going through the next process. Prevents in-circuit test and outdoor failure, provides control of the printing process.
The in-line solder paste inspection system reportedly provides reliable, accurate, 100% inspection at high speeds. Inspects numerous kinds of solder paste defects after screen printing by measuring height, area and volume in conjunction with the system’s fast and accurate 3-D data.
Can detect printing faults (volume, height, area, registration, bridge) and monitor the printing process, which helps the operator find the printing status quickly on the line. Uses SPC, providing printing process monitoring and control both on- and off-line.
Increases first pass yield by preventing faulty PCBs from going through the next process. Prevents in-circuit test and outdoor failure, provides control of the printing process.
Eunil H.A. Americas, parmi.com
440-R SMT Detergent is available in a ready-to-use spray bottle for safe, effective manual cleaning of SMT stencils and related tooling. The stencil-cleaning chemistry is verified for specific parameters of environmental safety, user safety and cleaning efficiency by the U.S. EPA’s Environmental Technology Verification Program.
While ultrasonic technology is effective for removing solder paste from SMT stencils, manual cleaning continues to be common. Stencil cleaning has been identified as the most hazardous process with the greatest potential environmental impact associated with SMT assembly. Flammable and VOC solvents such as alcohol and acetone are commonly used for manual cleaning and poisonous heavy metals such as lead often come in contact with the user. This safe water-soluble detergent cleans effectively, improves print production and eliminates noxious odors and hazards associated with solvent cleaning.
Smart Sonic Corp., smartsonic.com
AT Expo booth 6027
While ultrasonic technology is effective for removing solder paste from SMT stencils, manual cleaning continues to be common. Stencil cleaning has been identified as the most hazardous process with the greatest potential environmental impact associated with SMT assembly. Flammable and VOC solvents such as alcohol and acetone are commonly used for manual cleaning and poisonous heavy metals such as lead often come in contact with the user. This safe water-soluble detergent cleans effectively, improves print production and eliminates noxious odors and hazards associated with solvent cleaning.
Smart Sonic Corp., smartsonic.com
AT Expo booth 6027
Speedline Technologies has added a chemical
isolation option to its Accel MicroCel S2 centrifugal cleaning system. This platform enhancement improves existing
zero-discharge systems and extends the life of mixed-bed deionizing
resins.
The open programming platform and interface are said to make the chemical isolation option simple to set up. The system can be configured as a complete on-board, internal closed-loop recycle system, and as such the option can reduce operating costs.
The chemical isolation option will help minimize the amount of residual chemistry carried from the process chamber to the rinse vessel. The system can then reprocess the used rinse water through the internal closed-loop recycle system without contaminating the mixed bed deionizing resins, then recharge the rinse water to its previous deionized state.
Speedline Technologies, speedlinetech.com
Press Releases
- CE3S Announces Strategic Partnership with Ideal-tek to Expand Precision Tools Offering
- Bittele Electronics’ Malaysia Facility Achieves ISO 9001:2015 Certification
- Bittele Electronics’ Malaysia Facility Achieves ISO 9001:2015 Certification
- Kitov AI Inc., FANUC America partner to advance AI-driven smart manufacturing solutions