caLogo

Products

The OptiCon series AOI platform can inspect components on PCBs with an angled view by using a newly developed optics module. Can execute inspections in 45° angle from four directions. Uses telecentric imaging and high resolution.
 
The modular AOI platform enables individual configuration of OptiCon systems. Typical applications for Quattro angled view are the evaluation of hard to see solder joints and components (e.g. at J-lead pins of PLCC and SOJ models or SMT connectors) but major gains will be in next-generation components such as OFNs.
 
 
GÖPEL electronic, goepel.com
HARRISBURG, PA -- Tyco Electronics has introduced a low profile, single connector, microminiature RF interconnect to meet the demand for direct board-to-board connections. 
 
Traditionally, board-to-board RF connections have been achieved with either two cable connectors or two board connectors with a third, spacer or bullet, between. Compression Coax Board-to-Board Blindmate product eliminates the need for multiple connectors – and their added cost – by offering a single connector assembly with spring-loaded contact.  One side is soldered on the base circuit board surface and the other side mates directly on the opposite target board using applied spring pressure.  One piece design offers an easy connection with large radial and axial misalignment, and eliminates the risk of breaking soldered connections when mating or un-mating. 

Available in three different lengths for board spacing of 6.65, 10 and 14 mm, and is supplied in trays for easy pick-and-place compatibility.  Has an operating temperature range of –40 to +125°C, impedance of 50 Ohms and can operate effectively at frequencies up to 6 GHz.  Return loss is specified as a minimum –20 dB at frequencies up to 2.1 GHz.  Tolerance against axial misalignments from the nominal board stacking height is ±1.0 mm for the 10 and 14 mm versions, and ±0.3 mm for the 6.65 mm version. Tolerance against radial misalignment is ±0.8 mm from centerline, in any direction, for all three versions. Target pads can be tin plated, or a gold-plated disc can be applied to the mating PCB. 

Tyco Electronics, tycoelectronics.com

Viscom’s high-speed S6056 AOI system will debut during Productronica in November. The system features parallel inspection of two PCBS with a double-track system.
 
Uses 4M sensor technology and EasyPro operating environment.
 
Three different inspection concepts can be implemented, depending on the customers requirements. In addition to selective inspection using single or double-tracks, it also offers parallel inspection to meet very high throughput rate requirements.
 
System configuration is fitted with a double-track and two sensor modules, permitting simultaneous inspection of two PCBs per transport lane. Has no size limitations on PCBs up to 457 x 355 mm. Integrated shuttle is available for the twin-track, on the input or output side, obviating the need for external switching points for single-line production.
 
Has integrated switchgear cabinet with a hinged frame for ease of maintenance.
 
Is lead-free capable – as ensured by algorithm rules-based analysis, which is capable of obtaining optimum results under even highly varying contrast conditions.

Viscom, viscom.de
Productronica, Hall A2, Stand 475

Page 1896 of 2032

Don't have an account yet? Register Now!

Sign in to your account