Products
IMPACT T22 is an intelligent camera designed as a drop-in replacement for obsolete or underpowered vision systems. An extension to the T-series, the image processing computer is contained inside the camera, enabling it to be deployed without additional image processing hardware.
Has ½-inch CCD, is interchangeable with older, camera-based vision systems, enabling manufacturers to upgrade older vision engines to achieve real-time inspection while reusing existing optical and lighting components. Suitable for analog and digital systems.
PPT VISION, pptvision.com
Has ½-inch CCD, is interchangeable with older, camera-based vision systems, enabling manufacturers to upgrade older vision engines to achieve real-time inspection while reusing existing optical and lighting components. Suitable for analog and digital systems.
PPT VISION, pptvision.com
The OptiCon series AOI platform can inspect components on PCBs with an angled view by using a newly developed optics module. Can execute inspections in 45° angle from four directions. Uses telecentric imaging and high resolution.
The modular AOI platform enables individual configuration of OptiCon systems. Typical applications for Quattro angled view are the evaluation of hard to see solder joints and components (e.g. at J-lead pins of PLCC and SOJ models or SMT connectors) but major gains will be in next-generation components such as OFNs.
GÖPEL electronic, goepel.com
The modular AOI platform enables individual configuration of OptiCon systems. Typical applications for Quattro angled view are the evaluation of hard to see solder joints and components (e.g. at J-lead pins of PLCC and SOJ models or SMT connectors) but major gains will be in next-generation components such as OFNs.
GÖPEL electronic, goepel.com
HARRISBURG, PA -- Tyco Electronics has introduced a low profile, single connector, microminiature RF interconnect to meet the demand for direct board-to-board connections.
Available in three different lengths for board spacing of 6.65, 10 and 14 mm, and is supplied in trays for easy pick-and-place compatibility. Has an operating temperature range of –40 to +125°C, impedance of 50 Ohms and can operate effectively at frequencies up to 6 GHz. Return loss is specified as a minimum –20 dB at frequencies up to 2.1 GHz. Tolerance against axial misalignments from the nominal board stacking height is ±1.0 mm for the 10 and 14 mm versions, and ±0.3 mm for the 6.65 mm version. Tolerance against radial misalignment is ±0.8 mm from centerline, in any direction, for all three versions. Target pads can be tin plated, or a gold-plated disc can be applied to the mating PCB.
Tyco Electronics, tycoelectronics.com
Traditionally, board-to-board RF connections have been achieved with either two cable connectors or two board connectors with a third, spacer or bullet, between. Compression Coax Board-to-Board Blindmate product eliminates the need for multiple connectors – and their added cost – by offering a single connector assembly with spring-loaded contact. One side is soldered on the base circuit board surface and the other side mates directly on the opposite target board using applied spring pressure. One piece design offers an easy connection with large radial and axial misalignment, and eliminates the risk of breaking soldered connections when mating or un-mating.
Available in three different lengths for board spacing of 6.65, 10 and 14 mm, and is supplied in trays for easy pick-and-place compatibility. Has an operating temperature range of –40 to +125°C, impedance of 50 Ohms and can operate effectively at frequencies up to 6 GHz. Return loss is specified as a minimum –20 dB at frequencies up to 2.1 GHz. Tolerance against axial misalignments from the nominal board stacking height is ±1.0 mm for the 10 and 14 mm versions, and ±0.3 mm for the 6.65 mm version. Tolerance against radial misalignment is ±0.8 mm from centerline, in any direction, for all three versions. Target pads can be tin plated, or a gold-plated disc can be applied to the mating PCB.
Tyco Electronics, tycoelectronics.com
Press Releases
- KIC Expands Footprint in Mexico to Deliver Faster, Localized Support
- ECIA Executive Conference Announces Session on eCrime Tradecraft
- ICZOOM Group Inc. Announced the Launch of PCB & SMT Services to Strengthen One-Stop Electronics Industry Solution at IIC Shenzhen 2025
- Amtech Unveils Proprietary Automation Model for High-Mix, Low-Volume Manufacturing