This 68-position MDR I/O board-mount receptacle connector conforms to standard SCSI-2 pin-and-socket interfaces. Permits use of MDR wiper-on-wiper connectors in applications that previously required pin-and-socket SCSI-2 connectors. Is reportedly suitable for an array of box-to-box applications, including telecommunications, networking, enterprise computing and factory automation. Its ribbon-style contact is said to eliminate “pin stubbing” failures and is reliable in repetitive plug-unplug applications.
 
3M, www.3m.com
 
 

Aquanox A4625B is an MEA-free aqueous blend specifically designed for batch washers. Is said to remove flux residues and contaminants associated with most electronics assembly processes. Is said to be environmentally friendly. Reportedly is used at low concentrations for optimum cleaning efficiency without damaging delicate substrates.
 
Kyzen Corporation, www.kyzen.com

The latest Eliminator 6 (E6) fixtureless test system reportedly tests boards without solder masks, in addition to finished PCBs. Is said to eliminate the need for grids and to use full parametric DC measurements via an electromechanical scanning process. Specs include 250V-100 megaohm isolation test and 10 ohm continuity test.
 
Everett Charles Technologies, www.ectinfo.com 

iineo has a higher feeder count, and handles bigger boards and taller components than its predecessors. The platform uses a turret head, intelligent feeders, linear motors and digital cameras. Is configurable, allowing for a reported 24 different possibilities: single or dual linear motor gantry, including rotary turret head with eight or 12 pickups; one or two board positioning mechanisms; oversized board options; feeders in front and rear or front only. Is said to accommodate up to 264 x 8 mm tape positions. Maximum placement rate between 14,000 and 28,000 cph. Can handle PCB up to 1,500 x 600 mm and a component range from 01005 to 70 x 70 mm.
 
Europlacer, www.europlacer.com